Page 1 of 1
turbo bp
Posted: October 19th, 2006, 4:07 pm
by Gottagofaster
first i have a BP with pro lx tranny....
I want to boost. from whta i've found this is what i need tell me if this is right?
bp26 ecu or a piggyback to go with my bp09
gtx manifold(i was wondering exactly which one do i need...)
any IHI turbo i'm leaning towards a VF11 from a subaru...
IC piping and IC and bov
Is that everything?
Thanks
Kurt
Posted: October 21st, 2006, 5:54 pm
by Limegreen mx-3
why thank u for the plugs i decide to turbocharge the BP and leaving off where ric at racingmazda left off. he decided to go with the 2.0 FS engine and leaveing the BP's alone. so in time i'll be having a turbo sohc and BP. but good luck doing what u want to do.
Posted: October 21st, 2006, 8:32 pm
by Gottagofaster
I'm not exactly sure i understand what you just said??[/quote]
Posted: October 22nd, 2006, 1:23 pm
by Gottagofaster
Posted: November 6th, 2006, 1:35 pm
by ryanlindenberg
i wouldn't even bother with a kit. just find an intercooler that will fit nicely behind your bumper. then go to jegs or another similar company and buy some mandrel bent piping (which you will have to hack up to make fit). you will also need the couplers and fittings to connect the piping, and some GOOD vacuum hose for the blow off valve, etc. don't buy the cheap vacuum hoses on ebay (like i did, and they collapse under vaccum). buy some good stuff right away because you will end up buying it later anyway.
Posted: November 6th, 2006, 10:07 pm
by Gottagofaster
where do i get "good" vacuum hose? and the couplers?
Kurt
Posted: November 7th, 2006, 10:53 am
by BuGS
buy some real silicone vac lines that have thicker walls. I have some really good stuff I got from a Hydrolic wholesaler...
Posted: November 7th, 2006, 7:52 pm
by JWMotorsports
Silicon is for boobies...lol
I had silcon with super glue and zip ties...kept blowing them apart so I wagged war on them! Used -6AN SS Braided hoses and worm gear hose clamps....no more problems...period!
