Page 1 of 1
KLZE Parts
Posted: September 15th, 2006, 6:04 pm
by Vanished
OK so i'm starting to replace some parts for my ZE
Are all the parts for a KLDE? Or are some KLZE specific? I'm talking about things like..
Pulleys
Gaskets
Plugs/Wires
Oil Filter
PVC Valve
Water Pump
Posted: September 15th, 2006, 6:38 pm
by JWMX3
ZE intake manifold gaskets are square port, order them for a millenia
ZE plugs use the mx6/probe 4cyl plug i think(someone with a ze confirm this,?)
Posted: September 15th, 2006, 6:41 pm
by solo_ryder
Yes there are for a probe 2.0L 93+ BKR5E NGK Vpowers I beleive.
Posted: September 15th, 2006, 9:33 pm
by hgallegos915
really? im using the k8 ones and drives fine
Posted: September 16th, 2006, 3:28 am
by Vanished
k sweet thanks...
what about the other things
Posted: September 16th, 2006, 10:02 am
by Devlin
everything else yes, just ask for it from an mx-6 v6
and what's the diff between the 4cyl and v6 plugs?
i'm using NGK V6 MX-6 ones...would there be any benefit of using the 4cyl ones?
Posted: September 16th, 2006, 11:40 am
by mx3autozam
Deimos wrote:everything else yes, just ask for it from an mx-6 v6
and what's the diff between the 4cyl and v6 plugs?
i'm using NGK V6 MX-6 ones...would there be any benefit of using the 4cyl ones?
umm ya the 4cyl ones are the same as the k8 BKR5E-11...the mx6 ones are ZFRsomethinmg and tehre a bit longer. Some people ahve had issues with teh higher compression and the piston hitting the plug and closing the gap so they recomend the k8 ones but there the wrong heat range. so the ones to go with are BKR6E-11 Tahts what i sue and tahts what corksport sells as well
John
Posted: September 16th, 2006, 4:21 pm
by solo_ryder
Yea my bad they are the BKR6E-11's I had 5's and they ran ok, but they are not the right heat range. So i got 6's