Page 1 of 1
B6 sohc IAC valve
Posted: July 30th, 2006, 9:51 am
by Bochek
is this it? if it is i need to know 2 things.
i need someone to conferm its a pwm style iac valve.
i also need someone to conferm that the 1 wire going to it would be signal and it uses the mounting bolts as ground.
Bochek
Posted: July 30th, 2006, 6:16 pm
by Bochek
anyone?
Posted: July 31st, 2006, 8:51 am
by Bochek
anyone at all?
Posted: July 31st, 2006, 10:15 am
by Bochek
someone i need to know this today please! i would like to order my Megasquirt but need to conferm wich type of iac this is.
Bochek
Posted: July 31st, 2006, 1:34 pm
by ryanlindenberg
yep that's your IAC or BAC valve (i've heard them called both). mine is wired up to a PWM output on my haltech....so i guess it would be "PWM style".
on my haltech, one wire goes to the PWM output, the other is wired to 14.7 volts +.
Posted: July 31st, 2006, 3:57 pm
by Bochek
ryanlindenberg wrote:yep that's your IAC or BAC valve (i've heard them called both). mine is wired up to a PWM output on my haltech....so i guess it would be "PWM style".
on my haltech, one wire goes to the PWM output, the other is wired to 14.7 volts +.
i only have 1 wire comming outta it, from what i can see.
Posted: July 31st, 2006, 4:08 pm
by Bochek
<threadjack>
lol just was going thought your cardomain, nice sub setup!
mine....
</threadjack>
Posted: July 31st, 2006, 4:59 pm
by ryanlindenberg
are those free-airs?
mine don't pound very hard but i don't usually listen to my music that loud anyways. how do yours sound?
Posted: July 31st, 2006, 5:10 pm
by Bochek
ryanlindenberg wrote:are those free-airs?
mine don't pound very hard but i don't usually listen to my music that loud anyways. how do yours sound?
they sound great. they are not free air, but im uing them as free air, 25 watts per sub. 4 ohms. high quality everything, except for the subs themselves.
Bochek
Posted: July 31st, 2006, 8:30 pm
by Bochek
so does anyone know what the 1 wire going to the iac valve is for? ground or +12vdc?
Bochek
Posted: July 31st, 2006, 8:49 pm
by MechaManZero
if it was the ground how was it going to get volts, from the intake?
def not the ground if it is one wire. it would ground itself to the intake.
Posted: August 1st, 2006, 1:14 am
by xtreme velocity
ryanlindenberg wrote:are those free-airs?
mine don't pound very hard but i don't usually listen to my music that loud anyways. how do yours sound?
has anyone heard of bazooka tubes??
i have one of those n thay hit harder than a regular 8in sub..
n they r easy 2 install n already amped..
im gettin another one..
Posted: August 1st, 2006, 1:23 am
by ryanlindenberg
yea i think the wire you are talking about would be to a (+) source. if i'm not mistaken, the PWMs always act as the ground.
Posted: August 2nd, 2006, 7:14 pm
by Bochek
would this also be called a isc (idle controll solonoid) im trying to find it in the wiring diagrams.
IF it is, then it shows 2 wires going to it, white/red and blue/orange. the blue/orange goes driectly to the ecu and the white/red connects to alot of the other sensors including the distribure (wich we discussed in another topic) and to the ecu.
so if this information is correct, it is safe to state that the white/red is +12vdc and the blue orange is a pwm modified ground. correct?
This also means that the pictue above is NOT the iac valve. or is it and i just didnt see one of the wires?
Bochek