Page 1 of 1
KLZE in newer versions of the MX3?
Posted: December 4th, 2005, 2:57 pm
by MikeUK
Has any one ever installed a KLZE in a MX3 thats after the 92 virsion?
I understand there are problems when using the ECU.
How do you get round these problems?
Posted: December 20th, 2005, 5:56 am
by Black Magic
Hey
I've installed them from 91-98 I have swaped every year, except the 96.
Bastian
Posted: December 20th, 2005, 6:34 pm
by MikeUK
Do you find that the ECU wireing is different in the later models?
Posted: January 8th, 2006, 12:38 pm
by Black Magic
The ecu wiring is different, you can't use a kl31 or kl36 ecu.
Bastian
Posted: January 8th, 2006, 2:11 pm
by mxmaz
long as the car is obd1 it will be fine. obd1 was from 92-95, though there is speculation on here that some 95's were obd2. My 95 is obd1 though.
Posted: January 12th, 2006, 1:08 pm
by MikeUK
So mines a obd2, does that mean im screwed
Posted: January 12th, 2006, 1:30 pm
by garfy1981
Mines a " M " plate and Ze wired up with no problem. OBD1 tho. Unfortunately I dont know the answer to your question mate. Maybe your harness wont work with the KL-36 or KL-31 ecu's. Hence your unable to fire up a Ze lump. ?? So how to get more poke out of the K8 ??.
Posted: January 17th, 2006, 3:05 pm
by MikeUK
Which ones are ODB1 and ODB2? Just seen theres no list any where stating whats what? If there is sorry I must have missed it.