Page 1 of 1
Showing of my MX-3 with 7 inch screen in centerconsole+xbox
Posted: May 16th, 2005, 8:03 am
by lennis
Hi.
Just wanted to show you guys what I done to my cars interior. This was my schoolprodjekt.
Please give me your apinions and so on.
Pictures thell more than thousand words.
Screen
Centerconsole taken apart.
Testing testing
New vs old Glove compartment.
Test mounted ready for paint.
Painted hole for switches
Everything installed.
Other angle
Messy boot right now, going to rebuild as soon as possible.
Peece out Lennis
More pictures info on
http://kattmat.net/mx-3swe
Posted: May 16th, 2005, 9:37 pm
by hgallegos915
I LOVE IT
Posted: May 17th, 2005, 3:39 pm
by Custommx3
Nicejob.
I have a 7" touchscreen molded in the same place as yours for my carPC.
Posted: May 18th, 2005, 7:52 pm
by PATDIESEL
I love it and not to say anything negative, but maybe think about putting the CD payer in the cigarette lighters place o in the ash trays place. Then replace the glove box with a new one without a hole. PS, what are all those switches for?
Posted: May 19th, 2005, 7:39 am
by lennis
Hi,
thanks for all comments.
I have the orginal glove compartment left if a want to turn it back into a orginal mx-3 again.
Thats why I haven´t molded the screen into the console, thats why I din´t do like you said and put the cd player at the ash tray spot. To much cutting in my car
.
The switches are: from left to right
1: Neon inside, pedals
2: Neon under the car.
3: Uv-light at the cluster.
4: Cigarette plug1: to drive the DC to AC inverter.
5: -""- plug2: Screen power
6: Fm-modulator, my headunit dosn´t have AUX in :/
There you have the hole list
.
//Lennis
Posted: May 19th, 2005, 7:42 am
by lucky13
wow too much stuff for me. i like mine to look stock. nice job
Posted: May 19th, 2005, 10:33 am
by manowar821
I think it looks great, I would move the cd deck to the ashtray location as well though...
Very nice.
Posted: May 26th, 2005, 2:09 am
by ooELMOoo
i have the same set up as you.....but i found that i couldnt see the screen properly so i downgraded and got a 6.5 inch so i could fit it inbetween and tilt it up a little....its works great....what did u use to make the mold for your cd unit ???
Posted: May 26th, 2005, 7:31 pm
by fry_81
well done
Posted: May 27th, 2005, 2:55 am
by lennis
I didn´t mold anything.
I just cutted away little on the trim behind the centerconsole part. And fitted the screen behind the centerconsole then just pinned it betwen.
Hope you get it, little hard to explain for me.
Peace Lennis
Posted: September 12th, 2005, 7:13 pm
by lennis
If you want to se more pictures of my setup here you have 2 links.
Screen and Xbox
http://kattmat.net/mx-3swe/Xboxibilen/index.html
Glovecompartment in glasfiber.
http://kattmat.net/mx-3swe/Handskfackig ... index.html