Showing of my MX-3 with 7 inch screen in centerconsole+xbox

Car Stereo/Alarm Discussions
Post Reply
lennis
Regular Member
Posts: 31
Joined: July 24th, 2004, 2:01 am
Location: Sweden / Jönköping
Contact:
Contact lennis

Showing of my MX-3 with 7 inch screen in centerconsole+xbox

Post by lennis »

Hi.

Just wanted to show you guys what I done to my cars interior. This was my schoolprodjekt.

Please give me your apinions and so on.

Pictures thell more than thousand words.

Screen
Image

Centerconsole taken apart.
Image

Testing testing
Image

New vs old Glove compartment.
Image

Test mounted ready for paint.
Image

Painted hole for switches
Image

Everything installed.
Image

Other angle
Image

Messy boot right now, going to rebuild as soon as possible.
Image

Peece out Lennis

More pictures info on http://kattmat.net/mx-3swe
Mx-3 GS. CAI, dtm rear muffler, H&R spring with camber bolts. Painted interior, rebuilded front with gs lip and splitters. Real supra rear wing custom fitted almost done. blue homemade underkit neon, neon inside, glasfiber glovecompartment with the headunit in. XBOX + 7 inch screen .
Top
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:
Contact hgallegos915

Post by hgallegos915 »

I LOVE IT
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Top
User avatar
Custommx3
Site Administrator
Posts: 8391
Joined: November 7th, 2000, 2:01 am
antispam: ~SPAM*SUX~
Location: Lat 35.1N Lon -90W
Contact:
Contact Custommx3

Post by Custommx3 »

Nicejob.

I have a 7" touchscreen molded in the same place as yours for my carPC.
Top
User avatar
PATDIESEL
Senior Member
Posts: 4476
Joined: August 13th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Atlanta, GA.

Post by PATDIESEL »

I love it and not to say anything negative, but maybe think about putting the CD payer in the cigarette lighters place o in the ash trays place. Then replace the glove box with a new one without a hole. PS, what are all those switches for?
Image
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
Top
lennis
Regular Member
Posts: 31
Joined: July 24th, 2004, 2:01 am
Location: Sweden / Jönköping
Contact:
Contact lennis

Post by lennis »

Hi,
thanks for all comments.

I have the orginal glove compartment left if a want to turn it back into a orginal mx-3 again.
Thats why I haven´t molded the screen into the console, thats why I din´t do like you said and put the cd player at the ash tray spot. To much cutting in my car :P.

The switches are: from left to right :)

1: Neon inside, pedals
2: Neon under the car.
3: Uv-light at the cluster.
4: Cigarette plug1: to drive the DC to AC inverter.
5: -""- plug2: Screen power
6: Fm-modulator, my headunit dosn´t have AUX in :/

There you have the hole list :P.

//Lennis
Mx-3 GS. CAI, dtm rear muffler, H&R spring with camber bolts. Painted interior, rebuilded front with gs lip and splitters. Real supra rear wing custom fitted almost done. blue homemade underkit neon, neon inside, glasfiber glovecompartment with the headunit in. XBOX + 7 inch screen .
Top
User avatar
lucky13
Regular Member
Posts: 333
Joined: April 7th, 2003, 2:01 am
Location: El Paso, TX

Post by lucky13 »

wow too much stuff for me. i like mine to look stock. nice job
Top
manowar821
Supporting Member
Posts: 297
Joined: July 22nd, 2004, 2:01 am
Location: Minneapolis, MN. USA
Contact:
Contact manowar821

Post by manowar821 »

I think it looks great, I would move the cd deck to the ashtray location as well though...

Very nice. :o
Top
User avatar
ooELMOoo
Regular Member
Posts: 372
Joined: April 28th, 2005, 2:32 am
Location: Vancouver, BC , Canada

Post by ooELMOoo »

i have the same set up as you.....but i found that i couldnt see the screen properly so i downgraded and got a 6.5 inch so i could fit it inbetween and tilt it up a little....its works great....what did u use to make the mold for your cd unit ???
----------------
| CUSTOM X3|
----------------
Top
User avatar
fry_81
Regular Member
Posts: 1898
Joined: April 22nd, 2004, 2:01 am
Location: Barrie, Ontario, Canada
Contact:
Contact fry_81

Post by fry_81 »

well done :2thumbsup:
1994 5spd GS Parts Car For Sale 800obo. e-mail for details. fry_81@hotmail.com
Top
lennis
Regular Member
Posts: 31
Joined: July 24th, 2004, 2:01 am
Location: Sweden / Jönköping
Contact:
Contact lennis

Post by lennis »

I didn´t mold anything.
I just cutted away little on the trim behind the centerconsole part. And fitted the screen behind the centerconsole then just pinned it betwen.

Hope you get it, little hard to explain for me.

Peace Lennis
Mx-3 GS. CAI, dtm rear muffler, H&R spring with camber bolts. Painted interior, rebuilded front with gs lip and splitters. Real supra rear wing custom fitted almost done. blue homemade underkit neon, neon inside, glasfiber glovecompartment with the headunit in. XBOX + 7 inch screen .
Top
lennis
Regular Member
Posts: 31
Joined: July 24th, 2004, 2:01 am
Location: Sweden / Jönköping
Contact:
Contact lennis

Post by lennis »

If you want to se more pictures of my setup here you have 2 links.

Screen and Xbox
http://kattmat.net/mx-3swe/Xboxibilen/index.html

Glovecompartment in glasfiber.
http://kattmat.net/mx-3swe/Handskfackig ... index.html
Mx-3 GS. CAI, dtm rear muffler, H&R spring with camber bolts. Painted interior, rebuilded front with gs lip and splitters. Real supra rear wing custom fitted almost done. blue homemade underkit neon, neon inside, glasfiber glovecompartment with the headunit in. XBOX + 7 inch screen .
Top
Post Reply

Return to “Car Stereo/Alarm”