Well its almost done, may be soon. I did my first dyno session last thursday. All went as I thought it would (NOT ALL GOOD) Nothing broke and only had to minor issues. Redline is 10500, I only went to 7000 on the dyno. The car was at 140 mph at that rmp. Here is a press release from the last NHRA race.
http://www.urbanracer.com/articles/anmviewer.asp?a=1040&z=3
__________________
<small>[ August 19, 2004, 10:13 PM: Message edited by: Minimonster ]</small>
The new race car Racing Mazda
-
- Regular Member
- Posts: 83
- Joined: July 18th, 2002, 2:01 am
- Location: San Antonio, TX
- Contact:
The new race car Racing Mazda
Proud builder of
455 hp Miata 10.98@125mph
MX-3 RS 25 psi 451 hp
MX-6 F2T 12.8 @ 112 mph
(Current Project) A 700 hp MX-3 now at 475 hp
455 hp Miata 10.98@125mph
MX-3 RS 25 psi 451 hp
MX-6 F2T 12.8 @ 112 mph
(Current Project) A 700 hp MX-3 now at 475 hp
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: The new race car Racing Mazda
linkie no workie
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
- Regular Member
- Posts: 83
- Joined: July 18th, 2002, 2:01 am
- Location: San Antonio, TX
- Contact:
Re: The new race car Racing Mazda
Try it now
Proud builder of
455 hp Miata 10.98@125mph
MX-3 RS 25 psi 451 hp
MX-6 F2T 12.8 @ 112 mph
(Current Project) A 700 hp MX-3 now at 475 hp
455 hp Miata 10.98@125mph
MX-3 RS 25 psi 451 hp
MX-6 F2T 12.8 @ 112 mph
(Current Project) A 700 hp MX-3 now at 475 hp
-
- Regular Member
- Posts: 51
- Joined: May 3rd, 2004, 2:01 am
- Location: San Antonio , Texas
- Contact:
Re: The new race car Racing Mazda
when it comes to mazdas, rick is the man to talk to. i wish he was a bit nicer tho, but it's all good. good job rick
save a lung, smoke a honda.
-
- Regular Member
- Posts: 83
- Joined: July 18th, 2002, 2:01 am
- Location: San Antonio, TX
- Contact:
Re: The new race car Racing Mazda
Thank You. I will work on the nice part.Originally posted by MiGhTymOuSe:
when it comes to mazdas, rick is the man to talk to. i wish he was a bit nicer tho, but it's all good. good job rick
Proud builder of
455 hp Miata 10.98@125mph
MX-3 RS 25 psi 451 hp
MX-6 F2T 12.8 @ 112 mph
(Current Project) A 700 hp MX-3 now at 475 hp
455 hp Miata 10.98@125mph
MX-3 RS 25 psi 451 hp
MX-6 F2T 12.8 @ 112 mph
(Current Project) A 700 hp MX-3 now at 475 hp