MX-3.com

Hey guys, finally got pics of my car up.
http://www.cardomain.com/memberpage/652555
Should have a video up soon with an 11 second pass. Shooting for 9's by next race season and we will be running in the nopi turbo 4 class along with nhra spfwd.

<small>[ August 12, 2004, 08:13 AM: Message edited by: Ma-Ze ]</small>

wow
i can't believe your still using the stock manifold with that much hp

For some reason i thought you still had the SOHC engine. but i am guessing that it the bp engine then you turboed that??? Plz explain. Thanks!

thats not the stock manifold

intake manifold

Originally posted by Marlon:
wow
i can't believe your still using the stock manifold with that much hp

It wont be there much longer, after i get my new head and roll cage put in, ill be getting a new intake manifold.

man thats nice setup how much it cost you?

was wondering what ignition system are you using, and what are you using for fuel management?

man yall should advertise these manifolds on other mazda sites as these turbo manifolds will sell like hotcakes. if and when i upgrade my turbo ill def be getting me one of these with the turbo :p . very nice setup from what i can see!!!

Originally posted by Josh:
was wondering what ignition system are you using, and what are you using for fuel management?

Tec III(Electromotive)...

I'd have to say a really good engine management at that.

Originally posted by natural born honda killer:
man yall should advertise these manifolds on other mazda sites as these turbo manifolds will sell like hotcakes. if and when i upgrade my turbo ill def be getting me one of these with the turbo :p . very nice setup from what i can see!!!

If I get enough request on the manifold. I might sell them. It is a race set up so it will not fit with A\C

yah, whats the price for the upgrades to make it a 10 second car

<small>[ August 13, 2004, 11:23 PM: Message edited by: Vanshed ]</small>

Originally posted by Minimonster:

Originally posted by natural born honda killer:
man yall should advertise these manifolds on other mazda sites as these turbo manifolds will sell like hotcakes. if and when i upgrade my turbo ill def be getting me one of these with the turbo :p . very nice setup from what i can see!!!

If I get enough request on the manifold. I might sell them. It is a race set up so it will not fit with A\C

I'm interested in the exhaust manifold...
And I'm not using A/C. Does it have any bracing to support the weight of the turbo(a bracket from the block to the manifold or turbo)?

Originally posted by jaydog5678:

I'm interested in the exhaust manifold...
And I'm not using A/C. Does it have any bracing to support the weight of the turbo(a bracket from the block to the manifold or turbo)?

yea it has support. if you look closely at the pictures of the manifold you can see it on the right side.

thats exactly what i want. if i don have to make it then thats better on me. but i got the 1.6L. my man has a crack, got it welded but she cracked again. loss of HP. its not too bad but i need to do something soon. about how much do you think thies will run if you decide to make them.