MX-3.com

I want to keep my stock 10:1 compression but want a stronger piston and rods. anyone know where i can get a hold of some? or a link that sells them.
Im porting and polishing the heads now and i bought the 280 degree cams from a company out of new york. I also have an stronger valve springs, external msd upgrade, aftermarket headers, 9lb flywheel and a six puck race clutch, plan on buying the Quafe LSD also. Car will be running at least a 100 shot direct port wet sponsered by nitrous express all computer controlled by a palm pilot. ran 12.8 at 110 mph in the 1/4 this year. not bad if i say so with a 75 dry shot on bald drag radials. any help would be greatly appreciated.

<small>[ October 28, 2004, 07:21 PM: Message edited by: Zoso124 ]</small>

yup cyborgzerp offers pistons and rods for 1300$..I bought them a week ago..I can send you pics when I'll receive them...by the way it's not called a stroker kit..A stroker kit gives you a longer stroke..the pistons offered by cyborgzero are 0.020" overbore making your car a 2.6L. you are looking for forged internals and not a stroker kit

Was that 1300 shipped ?

yeah it was...

thanks

why don't u just get custome JE pistons with crowler rods or eagle rods! a guy i know just got his and he paid 1400 CDN shipped ! just a suggestion

do eagle and crowler make rods for 2.5s?

and babyblue, was that 1300 us or cdn shipped?

<small>[ October 29, 2004, 11:30 PM: Message edited by: Jon_Carnie ]</small>

it was USD

yes it was usd ...I I reallly doubt you can get custom pistons from JE for under 700usd and same with the rods..ANd you don't have the pistons rings wrist pins ans bearings...
I checked with ross pistons and IIRC they were charging me 800usd for customs pistons..
remember we have 6 pistons not 4 like the other guys (honda, talon, etc.)

cyborgzero is the only one that makes forged internal stuff..

anyways I still think that 1300usd for full forged internals parts are good

the pistons are made by Wiseco and are made with 4340 forged chromoly..they are lighter than stock too.
the rods are made by Scat and they are shotpeened

Millinea S rods with Wiseco pistons. This is a common setup for people on PT with FI.

Not to take away from Cyborgzero but, lets just say that their IM that was "ready to ship" has taken them 7 months. And nobody has yet to see one. Good luck Babyblue. Just a little heads up.

I got the tracking number and everything..should be here by the beggining of next week

I also sending my fuel rail there to get modded so they can fit the 370cc SR20DET injectors I bought.

yea u can babyblue a guy in kingston has an mx-3 with the klze with forged internals running 14 psi he only spent 1400 for everything !

Originally posted by dewthis:
Millinea S rods with Wiseco pistons. This is a common setup for people on PT with FI.

yeah it's true..I jungled with the idea..but nobody knows how much pressure can take the S rods..yeah they are beefer but are still stock rods..the good side of this is you can have forged internals for 900usd$..I didn't took a chance and bought the kit offered by czt..I dind't mind spending the extra 400$ and I'm sure to have some quality stuff

Originally posted by rdawg000:
yea u can babyblue a guy in kingston has an mx-3 with the klze with forged internals running 14 psi he only spent 1400 for everything !

what is everything? forged parts or full turbo and internals ? cad or usd ?..never heard of this guy and he's not too far from my place