stroker kit for KL-ZE
-
- Regular Member
- Posts: 217
- Joined: October 29th, 2002, 2:01 am
- Location: groton, ct.
- Contact:
stroker kit for KL-ZE
I want to keep my stock 10:1 compression but want a stronger piston and rods. anyone know where i can get a hold of some? or a link that sells them.
Im porting and polishing the heads now and i bought the 280 degree cams from a company out of new york. I also have an stronger valve springs, external msd upgrade, aftermarket headers, 9lb flywheel and a six puck race clutch, plan on buying the Quafe LSD also. Car will be running at least a 100 shot direct port wet sponsered by nitrous express all computer controlled by a palm pilot. ran 12.8 at 110 mph in the 1/4 this year. not bad if i say so with a 75 dry shot on bald drag radials. any help would be greatly appreciated.
<small>[ October 28, 2004, 07:21 PM: Message edited by: Zoso124 ]</small>
Im porting and polishing the heads now and i bought the 280 degree cams from a company out of new york. I also have an stronger valve springs, external msd upgrade, aftermarket headers, 9lb flywheel and a six puck race clutch, plan on buying the Quafe LSD also. Car will be running at least a 100 shot direct port wet sponsered by nitrous express all computer controlled by a palm pilot. ran 12.8 at 110 mph in the 1/4 this year. not bad if i say so with a 75 dry shot on bald drag radials. any help would be greatly appreciated.
<small>[ October 28, 2004, 07:21 PM: Message edited by: Zoso124 ]</small>
1992 MAZDA MX-3 GSR 2.5LTR V-6
2005 SUBARU STI
2004 NISSAN ARMADA
http://www.cardomain.com/id/wkdmx3gsr
http://www.netuners.com
2005 SUBARU STI
2004 NISSAN ARMADA
http://www.cardomain.com/id/wkdmx3gsr
http://www.netuners.com
- Zoso124
- Forum Moderator
- Posts: 1100
- Joined: November 7th, 2000, 2:01 am
- antispam: No
- Location: Sterling, VA
Re: stroker kit for KL-ZE
Mike Evans
Gone:
92 GS Tropical Emerald MTX 2.5L
93 GS Raspberry Metallic SE MTX 1.8L
Gone:
92 GS Tropical Emerald MTX 2.5L
93 GS Raspberry Metallic SE MTX 1.8L
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: stroker kit for KL-ZE
yup cyborgzerp offers pistons and rods for 1300$..I bought them a week ago..I can send you pics when I'll receive them...by the way it's not called a stroker kit..A stroker kit gives you a longer stroke..the pistons offered by cyborgzero are 0.020" overbore making your car a 2.6L. you are looking for forged internals and not a stroker kit
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
-
- Supporting Member
- Posts: 1637
- Joined: February 18th, 2003, 2:01 am
- Location: Jermyn,PA
Re: stroker kit for KL-ZE
Was that 1300 shipped ?
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul![Very Happy :D](./images/smilies/icon_biggrin.gif)
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul
![Very Happy :D](./images/smilies/icon_biggrin.gif)
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: stroker kit for KL-ZE
yeah it was...
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
-
- Regular Member
- Posts: 217
- Joined: October 29th, 2002, 2:01 am
- Location: groton, ct.
- Contact:
Re: stroker kit for KL-ZE
thanks
1992 MAZDA MX-3 GSR 2.5LTR V-6
2005 SUBARU STI
2004 NISSAN ARMADA
http://www.cardomain.com/id/wkdmx3gsr
http://www.netuners.com
2005 SUBARU STI
2004 NISSAN ARMADA
http://www.cardomain.com/id/wkdmx3gsr
http://www.netuners.com
Re: stroker kit for KL-ZE
why don't u just get custome JE pistons with crowler rods or eagle rods! a guy i know just got his and he paid 1400 CDN shipped ! just a suggestion
-
- Regular Member
- Posts: 99
- Joined: October 7th, 2002, 2:01 am
- Location: Ridgetown, Ontario, Canada
- Contact:
Re: stroker kit for KL-ZE
do eagle and crowler make rods for 2.5s?
and babyblue, was that 1300 us or cdn shipped?
<small>[ October 29, 2004, 11:30 PM: Message edited by: Jon_Carnie ]</small>
and babyblue, was that 1300 us or cdn shipped?
<small>[ October 29, 2004, 11:30 PM: Message edited by: Jon_Carnie ]</small>
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: stroker kit for KL-ZE
yes it was usd ...I I reallly doubt you can get custom pistons from JE for under 700usd and same with the rods..ANd you don't have the pistons rings wrist pins ans bearings...
I checked with ross pistons and IIRC they were charging me 800usd for customs pistons..
remember we have 6 pistons
not 4 like the other guys (honda, talon, etc.)
cyborgzero is the only one that makes forged internal stuff..
anyways I still think that 1300usd for full forged internals parts are good
the pistons are made by Wiseco and are made with 4340 forged chromoly..they are lighter than stock too.
the rods are made by Scat and they are shotpeened
I checked with ross pistons and IIRC they were charging me 800usd for customs pistons..
remember we have 6 pistons
![Smile :)](./images/smilies/icon_smile.gif)
cyborgzero is the only one that makes forged internal stuff..
anyways I still think that 1300usd for full forged internals parts are good
the pistons are made by Wiseco and are made with 4340 forged chromoly..they are lighter than stock too.
the rods are made by Scat and they are shotpeened
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
Re: stroker kit for KL-ZE
Millinea S rods with Wiseco pistons. This is a common setup for people on PT with FI.
65 shot > V8
Re: stroker kit for KL-ZE
Not to take away from Cyborgzero but, lets just say that their IM that was "ready to ship" has taken them 7 months. And nobody has yet to see one. Good luck Babyblue. Just a little heads up.
65 shot > V8
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: stroker kit for KL-ZE
I got the tracking number and everything..should be here by the beggining of next week
I also sending my fuel rail there to get modded so they can fit the 370cc SR20DET injectors I bought.
![Shrug :shrug:](./images/smilies/shrug.gif)
I also sending my fuel rail there to get modded so they can fit the 370cc SR20DET injectors I bought.
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
Re: stroker kit for KL-ZE
yea u can babyblue a guy in kingston has an mx-3 with the klze with forged internals running 14 psi he only spent 1400 for everything !
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: stroker kit for KL-ZE
yeah it's true..I jungled with the idea..but nobody knows how much pressure can take the S rods..yeah they are beefer but are still stock rods..the good side of this is you can have forged internals for 900usd$..I didn't took a chance and bought the kit offered by czt..I dind't mind spending the extra 400$ and I'm sure to have some quality stuffOriginally posted by dewthis:
Millinea S rods with Wiseco pistons. This is a common setup for people on PT with FI.
what is everything? forged parts or full turbo and internals ? cad or usd ?..never heard of this guy and he's not too far from my placeOriginally posted by rdawg000:
yea u can babyblue a guy in kingston has an mx-3 with the klze with forged internals running 14 psi he only spent 1400 for everything !
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)