MX-3.com

I am considering swapping my 1.8L for the 2.5L KLZE-30. Wanted to see if anyone has any advice on this, as to i have no clue on any of it. Also, Do you know where i can get this engine from at a good price? Lastly, whats the opinion on dropping a turbo into this baby?

There is Lots of advice on the KLZE engine on this site it's one of the most talked about things do a search you'll come up with a ton of info

Yeah man just search it, there is a ton of info. If you don't know anything about it don't even think about turboing right now.. I got my motor at nippon-motors.com and it's in excellent condition.. There are a number of other places... try googling it

also you may wanna try searching on probe talk 2 they have alot to do with the KLZE.

If you research it properly> it tells you what you need, how to do the swap, and how to set the klze up>>>
This site is one of the best sources I have come across for a car

soposively you can run up to 7psi on the klze, but most recomend 5psi.

I wanna see someone do the miller cycle motor one day someone will!

Originally posted by Mnemonic:
soposively you can run up to 7psi on the klze, but most recomend 5psi.

I wanna see someone do the miller cycle motor one day someone will!

I've seen 9.5 psi on stock internals on a ze

I got mine form sunsengines. Not a bad price, and the engine showed up REALLY clean. Haven't installed it yet, but all looks well.
There's a ton of info on this site, bro. One word:
search. Print out the good ones, and you'll have enough reading material for a hundred trips to the bathroom.