Page 1 of 1
klze swap problem
Posted: May 13th, 2004, 6:00 pm
by korban
when i start the car, it redlines .
any idea what might be wrong.
Still have stock 1.8l ecu ..
is there anyone here that has a clue?
can anyone msg me a number perhaps and i can explain better over the phone.
Thanks.
Re: klze swap problem
Posted: May 13th, 2004, 6:06 pm
by IanL
This may be a little obvious, but have you checked your throttle is not stuck open?
Re: klze swap problem
Posted: May 13th, 2004, 6:12 pm
by korban
checked the throttle already.. think its electical or a vacum line ... dont know what it is. its baffleing me and getting really frustrating..
Re: klze swap problem
Posted: May 13th, 2004, 8:09 pm
by DavidOS
yah thats vaccum related make sure all vaccum lines are hooked up and that the little breather ontop of the motor is closed off or plugged up.
Re: klze swap problem
Posted: May 14th, 2004, 7:53 pm
by Gabi
Give me a call, if still have problems. 851-7786
Re: klze swap problem
Posted: May 23rd, 2004, 3:46 am
by DaKLzE
Hey guys..Im new to this..and Im really frustrated...Im going bald from this. OKay, I see you guys have done the KLZE swap. I just got my KLZE in today.. and I finished wiring everything, but for some apparent reason, i still have 4 harness clips that are hanging loose. I try to start the car, adn all i get is the starter relay clicking, but no turn. Please Help Me..Please??!?!?!?!?
Re: klze swap problem
Posted: May 26th, 2004, 5:09 pm
by korban
my swap is finalize and running beasty
yes. the clips are a bugger to fix up unless you have labeled them before hand.. Take some picks ill try and help you out. the solonoids where the trickiest for me.