MX-3.com

I have gotten solid urethane mounts made for the Probe/Mx6's and now I am curious the interest in the Mx-3 crowd's. Here is a picture of how the Probe ones turned out.
<img src="http://home.comcast.net/~nolanspawn/pics/mounts10.jpg" alt=" - " />

If you guys are intersted in these kinds of mounts let me know. They arent just inserts they are full replacements w/ urethane cores. They are made from much stronger than stock material and are gold cadmium plated to prevent rusting and give them a flashy look. If someone would post pics for me of stock V6 Mx3 mounts I would appreciate it.

Josh

Those interested

1. playaa
2. curtklze
3. Si
4. BADMX3
5. mxer4eva
6. Gro Harlem
7. Buff1110
8. andy
9. Pat
10. Dennis Jørgensen
11. Tom Horn
12. thebonestockkid
13. babyblueMX3
14. bubba_03
15. papa roached
16. BATTOSAI
17. GuidoBiRiChiNo
18. 13flat
19. Ryan Dunagan
20. tonguefreek
21. DavidOS

<small>[ May 09, 2004, 08:39 PM: Message edited by: nolanspawn ]</small>

im interested for sure...

Im interested as well.

count me in...

how many $$$'s do you think you can make them for?

I'm in as long as they are done in the next 2/3 months!

Does anyone have pics of the stock V6 mounts?

Josh

Originally posted by Si:

how many $$$'s do you think you can make them for?

They should be around 125 + shipping.

Josh

<small>[ February 05, 2004, 10:35 PM: Message edited by: nolanspawn ]</small>

would those fit onto the the ze? if so i may be interested in the next 2/3 months!!!

yeah id be in, but like some other people said id need like a month or so.

Thanks,

miguel

i "might" be interested. I can get pics of stock mounts. they are very similar, if not identical to the probe ones. I know taht the probe inserts won't fit, b/c the contours of the inside rubber are different compared to MX3's, but since these are complete replacements for the motor mounts i wouldn't be surprsied if they'd bolt up.

sounds good ill be in, just keep us updated

Originally posted by nolanspawn:
I have gotten solid urethane mounts made for the Probe/Mx6's and now I am curious the interest in the Mx-3 crowd's. Here is a picture of how the Probe ones turned out.

If you guys are intersted in these kinds of mounts let me know. They arent just inserts they are full replacements w/ urethane cores. They are made from much stronger than stock material and are gold cadmium plated to prevent rusting and give them a flashy look. If someone would post pics for me of stock V6 Mx3 mounts I would appreciate it.

Josh

Has anyone found your replacements too stiff on the PGT/MX6, people want the stiffer mounts but don't want to lose the fillings in the teeth at the sametime. Also, make sure u get the from Jeff if your going to do a bulkbuy.

count me in. I recently replaced the front mount. that would be the one on the right in your picture.
I still need to replace the rear mount but the local parts stores don't seem to carry it.

one suggestion: It would be great if you could include in a kit the rubber grommets for the crossmember, I had to fudge some, the stock 11 year old rubber fell apart.

on another note: I believe the probe front mount is what the store wound up ordering for me but I had to bore out the mounting holes on the crossmember to accept bigger studs.

I should mention that the rear mount pictured(left) doesn't look anything like our rear mount.
otherwise I would have ordered it months ago.
sorry I don't have any pictures for you .

Thanks for your time and effort.
Andy P. 93 GS

<small>[ February 06, 2004, 07:40 AM: Message edited by: andy ]</small>

Originally posted by andy:
count me in. I recently replaced the front mount. that would be the one on the right in your picture.
I still need to replace the rear mount but the local parts stores don't seem to carry it.

one suggestion: It would be great if you could include in a kit the rubber grommets for the crossmember, I had to fudge some, the stock 11 year old rubber fell apart.

on another note: I believe the probe front mount is what the store wound up ordering for me but I had to bore out the mounting holes on the crossmember to accept bigger studs.

I should mention that the rear mount pictured(left) doesn't look anything like our rear mount.
otherwise I would have ordered it months ago.
sorry I don't have any pictures for you .

Thanks for your time and effort.
Andy P. 93 GS

If yo're having all that trouble, why not just fill the stock mounts and make them solid?

I would be in for sure. I am swapping this summer... my engine is being completly rebuilt.

elektromaniak@hotmail.com

add me to your list
thanks