1992 MX-3 GS Parting Out *UPDATED*
-
- Regular Member
- Posts: 269
- Joined: July 20th, 2002, 2:01 am
- Location: Hemlock,Michigan -USA-
1992 MX-3 GS Parting Out *UPDATED*
No front body parts(healights, hood, fenders, or bumper). All innerstructure is good. Rear end is good. 2 complete doors. No spoiler. Interior all gone except trunk and hatch panels/trim. Dash still available. Brake calipers all 4 available. Lots of engine parts. 5-speed tranny w/ 106,000 miles, shifted perfect. All drivetrain/exhaust still there too. Let me know your needs. A.J.
Re: 1992 MX-3 GS Parting Out *UPDATED*
How about your A/C Heater Controls... Also does your door panels have power windows? if so I need the panels.. and your driver side window switch
-
- Regular Member
- Posts: 269
- Joined: July 20th, 2002, 2:01 am
- Location: Hemlock,Michigan -USA-
Re: 1992 MX-3 GS Parting Out *UPDATED*
Playaa, door panels went with the interior. Don't have the ac button/switch. Have the heater control panel. Sold drv side pwr wind switch, have a passenger pwr wind switch. Peace, A.J.
- monty73741
- Forum Moderator
- Posts: 2651
- Joined: February 11th, 2001, 2:01 am
- Location: baltimore,md usa
- Contact:
Re: 1992 MX-3 GS Parting Out *UPDATED*
do u still have the stock driver side seat rails
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Re: 1992 MX-3 GS Parting Out *UPDATED*
How much for your HVAC controls.
-
- Regular Member
- Posts: 269
- Joined: July 20th, 2002, 2:01 am
- Location: Hemlock,Michigan -USA-
Re: 1992 MX-3 GS Parting Out *UPDATED*
Let the rails go with the seats. HVAC controls guessing thats a name for the main heater controls, one above the radio? Make me an offer bud, Peace, A.J.
-
- Junior Member
- Posts: 12
- Joined: January 17th, 2004, 2:01 am
- Location: Marquette, MI
- Contact:
Re: 1992 MX-3 GS Parting Out *UPDATED*
Hello, I was wondering if you had the JE-50 VAF or the V-6 16 lbs. flywheel? How muchshipped to marquette, MI?
1997 Probe GTS, 5-speed, KL-ZE Too many mods to list!
E-mail: daniel_depetro@yahoo.com
1973 Plymouth 'Cuda
1974 Plymouth Duster
E-mail: daniel_depetro@yahoo.com
1973 Plymouth 'Cuda
1974 Plymouth Duster
-
- Regular Member
- Posts: 269
- Joined: July 20th, 2002, 2:01 am
- Location: Hemlock,Michigan -USA-
Re: 1992 MX-3 GS Parting Out *UPDATED*
Got the JE-50 VAF out. Engine and tranny are still in the car. It would have stock V6 flywheel if stocks 16lbs then I have it too. Make me an offer. Thanks, A.J.
-
- Junior Member
- Posts: 12
- Joined: January 17th, 2004, 2:01 am
- Location: Marquette, MI
- Contact:
Re: 1992 MX-3 GS Parting Out *UPDATED*
I'll offer $100.00 shipped
1997 Probe GTS, 5-speed, KL-ZE Too many mods to list!
E-mail: daniel_depetro@yahoo.com
1973 Plymouth 'Cuda
1974 Plymouth Duster
E-mail: daniel_depetro@yahoo.com
1973 Plymouth 'Cuda
1974 Plymouth Duster
-
- Regular Member
- Posts: 269
- Joined: July 20th, 2002, 2:01 am
- Location: Hemlock,Michigan -USA-
Re: 1992 MX-3 GS Parting Out *UPDATED*
bump.. anyone?
Re: 1992 MX-3 GS Parting Out *UPDATED*
Do you still have part of the coolant neck? I need the top plastic piece.
<img src="http://members.aol.com/tranceformer95/part1.jpg" alt=" - " />
<img src="http://members.aol.com/tranceformer95/part1.jpg" alt=" - " />
-
- Regular Member
- Posts: 69
- Joined: January 7th, 2004, 2:01 am
- Location: Brighton, Ontario, Canada
Re: 1992 MX-3 GS Parting Out *UPDATED*
hey man, wonderin if u got a rad left, and in good shape, how much shipped if so....canadian funds please!!
-
- Regular Member
- Posts: 114
- Joined: December 31st, 2001, 2:01 am
- Location: Frisco, TX
- Contact:
Re: 1992 MX-3 GS Parting Out *UPDATED*
If you still have the complete motor available, let me know - email is jbierschwale@comcast.net. Thanks!
Jason B
1993 MX-3 GS
1.8 V6 5 speed
1993 MX-3 GS
1.8 V6 5 speed
-
- Regular Member
- Posts: 269
- Joined: July 20th, 2002, 2:01 am
- Location: Hemlock,Michigan -USA-
Re: 1992 MX-3 GS Parting Out *UPDATED*
I do have the motor. Only thing is it has a blown headgasket, and no distributor, and some of the tensioners, pulley I sold. Other then that complete depends what you need it for, great for parts... Let me know A.J.
-
- Regular Member
- Posts: 269
- Joined: July 20th, 2002, 2:01 am
- Location: Hemlock,Michigan -USA-
Re: 1992 MX-3 GS Parting Out *UPDATED*
Don't have a good radiator, sorry.. AC Condenser is cool I think. Later A.J.