Page 3 of 3
Re: MX-3 Audio Project - Custom Sub Box / New Sub, Amp, Spea
Posted: December 10th, 2011, 11:19 am
by JDMChris
BuGS wrote:Sweet setup man! If you ever get the chance though, so listen to someone with a similar setup with a ported box.... You will love what you hear if the box is made right
my buddy has a ported box in his trunk. sounds nice. pounds. Mine has a nice clean low bass and pounds hard when i crank it up. Would like a different deck tho.
Re: MX-3 Audio Project - Custom Sub Box / New Sub, Amp, Spea
Posted: March 3rd, 2012, 12:38 am
by wagZE
I install car audio for a living, neuman is right caps are not functional most of the time. Do some research on 'the big 3'. It is the best way to upgrade your electrical system & keep ground wires as short as possible.
You would get double the juice from your amp if you ran it @ a 2 ohm load (if you would've gotten a single 2 ohm sub or a dual 4 wired down to 2) .
Its a decent box! good job sound deadening, it is a way to get the most sound for your buck. I noticed a huge difference on my mx-3's after sound deadeding.
Re: MX-3 Audio Project - Custom Sub Box / New Sub, Amp, Spea
Posted: October 17th, 2013, 4:51 pm
by red sin
Nice work, but the sub is quite big...