List your MODS for your MX-3!

[Spydie]

KL-ZE (recently sold to babyblue MX3, need to replace)
Tokico struts, Apex springs 1.6" lowered, front and rear strut tower bars, HKS super mega flow CAI, ZEX Nitrous Oxide, Unorthodox Racing underdrive pully, ractive 9mm ignition wires, Outlaw Engineering IM thermo spacers, upgrading to Bully stage 2 clutch, Surestop Xdrilled rotors, Wagner thermoquiet carbon-metallic pads, ractive DTM exhaust, black altezza's, FX Designs Series II functional hoodscoop, combat chin spoiler, rear hatch shade, Primax 17 x 7" rims, Dunlop SP Sport FM901 205/40ZR/17 tires, Autotecnica steering wheel and shift knob, momo shifter boot, Recaro KSR-2 racing seats, red painted dash, door inserts, and accents, Viper alarm, Clarion cd player, Sony Xplod 180W 2 way mids, Sony Xplod 222W amp, MTX Audio Thunder 6000 10" thud in custom MTX enclosure, costom paint and detail of engine bay<p>[ July 10, 2003: Message edited by: Darren Hyderman ]</p>

[Johns93GS]

Let's get some more in here! Looks like a lot of hard work goes into everyone's MX-3, so let's show off what we've done! :p

[Zoso124]

Mods:
"Sponge Bob Square Pants" Air Freshner<p>
Don't believe that stuff in my signature, its bunch of bologna

[gueedo]

1. NOS sticker on each door panel
2. 17" hubcaps with fake calipers
3. V6 Turbo badge on my 4 banger
4. painted brake calipers that you really can't see because they're hidden by #2
5. Black painted hood (to look like CF) with hood pins
6. A generic wing that actually goes higher than my roof.
7. MazdaSpeed written across my windshield
8. 4 large speakers in the engine bay that simulate the blow off sound from a turbo
9. Spark plug at the end of my exhaust pipe which creates a 1cm flame out the back
10. large generic 6 inch diameter muffler
11. Strut bars at every point in the car where they should be, and in a few places they shouldn't but look really cool.
12. A few non working pillar gauges.
13. A custom short shifter that I made by hammering the shifter down towards the floor. I can't shift anymore though, so I'm stuck in 1st gear. But, o well, it looks cool. )
19. A 1991 Dodge Caravan tail light swap.
20. my seats have been glued into a reclining position of 170 degrees.
21. stripped the paint off my front and rear bumper and repainted it with a grey, primer-like, color.
22. One large, single yellow wiper blade, because they were out of all other colors at the import store.<p>That's about it. But, would you believe it, yesterday somebody stuck a Rice Cop ticket underneath my oversized wiper blade. They said my car was the riciest car in the DC area. Some people just have no taste. As you can tell I'm REALLY bored at work right now.<p>[ June 30, 2003: Message edited by: MikeX-3 ]</p>

[killerpickle]

lol..

[cjthor]

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by MikeX-3:

14. Custom license plate that reads "TURBOMX"<p>
[ June 30, 2003: Message edited by: MikeX-3 ]<hr></blockquote><p> Makin fun of my plate eh??

[gueedo]

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by cjthor:
<p> Makin fun of my plate eh??<hr></blockquote><p>not at all. actually...I totally forgot that your plate had that. I was just saying that that's a rice thing to do if you DON'T have a turbo engine that's all.

[Gro Harlem]

Well, my MX3 is stock right now, but I have already purchase, or ordered the following for it:<p>Engine:
-2.5 KLZE millenia motor
-KLZE ecu from layzie
-Pace****ter headers
-outlaw insulators
-JUN titanium muffler
-magencor plugwires<p>Suspension:
-hyperco racing suspension
-front and rear corksport strut tower bars
-SRD tiebar
-urethane bushing kit for control arms, and trailing arms
-mazdaspeed front endlink kit
-15" mazda alloy wheels with Falken ZIEX 512's<p>exterior:
-mazdaspeed front end
-mazdaspeed sidecaps
-mazdaspeed rear spoiler
-custommx3 projector headlights (when they come out)
-inverted CF hood
-new paint job (long way down the road)<p>interior:
-reverse indiglo gauges
-aluminum gauge bezel
-mp3 short shifter with leather knob
-leather GS interior
-side fabric replace with either silver or red vinyl/leather
-black side pillars and headliner<p>stereo:
-JVC sh9750 head unit
-infinity reference components (front
-infinity reference coaxials (rear)
-12" solobaric L7 in sealed box
-JBL 600.1 amp for subs
-alpine F340 amp for speakers
-viper 500ESP alarm

[Johns93GS]

Let's get some more in here everyone!!! :p

[jpwmx3]

17" Fastco Tango rims
Kumho 711 205/40/17 tires
OEM side skirts
Front strut bar
Custom CAI
After market stereo system
Aluminum instrument cluster back plate
side window rain deflectors

[C-MX-DA3]

klze
custom catback dual exhaust
powder coated valve and intake cover
molded gforce kit all around
miata headlight conversion
shave emblems and antenna
car painted with sunburst yellow with gold and white pearls
custom maid interiors(yellow n black vinyl)
reverse glow gauges(in the mail)
aluminum gauge bezel
mx3 aluminum pedals
small kine system (not to big on system)