[FS] Turbo, Wideband, Hatch Shade, etc.. NEED TO GO
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
[FS] Turbo, Wideband, Hatch Shade, etc.. NEED TO GO
Selling every part I accumulate over the year that never made it onto the car.
Every price is in CAD and doesn't include shipping.
Price ar all Negotiable.
Will make better price if you buy more.
D1 Extended Lug nut (30$)
AEM uego wideband (170$)
Powdercoated Mazda front Valve cover (20$)
Set of really clean stock KLDE Head (100$)
Curve Neck Manifold (60$)
Cam pulley (20$)
Stock KLDE CAM (40$)
Turbo setup (sold)
This setup made 400WHP on a stock KLDE at 16psi. Holset is a really nice turbo for a KL.
custom pipe Hot pipe and down pipe
Holset HY35
ebay intercooler/piping
dsm BOV
taped oilpan/oil line to fit the pan/pipe setup
modded cross member
Hatch Shade with bracket (sold)
Probinator chip (sold)
aem electronic boost controller (sold)
11 Nissand 550cc injector (sold)
bored rail to accept nissan injector (sold)
6 Nissan injector plug (sold)
Brand new 255 Walbro (sold)
BNIB traction bar setup (sold)
full BNIB witbushing set (sold)
MS'n'S V2.2 comes with everything needed (sensor etc) (Sold)
Stock Oil pan (sold)
on with the pic:
BNIB AEM uego wideband
(Pic to come)
Powdercoated Mazda front Valve cover
Set of really clean stock KLDE Head
Curve Neck Manifold
Cam pulley
Stock KLDE CAM
D1 Extended Lug nut
Every price is in CAD and doesn't include shipping.
Price ar all Negotiable.
Will make better price if you buy more.
D1 Extended Lug nut (30$)
AEM uego wideband (170$)
Powdercoated Mazda front Valve cover (20$)
Set of really clean stock KLDE Head (100$)
Curve Neck Manifold (60$)
Cam pulley (20$)
Stock KLDE CAM (40$)
Turbo setup (sold)
This setup made 400WHP on a stock KLDE at 16psi. Holset is a really nice turbo for a KL.
custom pipe Hot pipe and down pipe
Holset HY35
ebay intercooler/piping
dsm BOV
taped oilpan/oil line to fit the pan/pipe setup
modded cross member
Hatch Shade with bracket (sold)
Probinator chip (sold)
aem electronic boost controller (sold)
11 Nissand 550cc injector (sold)
bored rail to accept nissan injector (sold)
6 Nissan injector plug (sold)
Brand new 255 Walbro (sold)
BNIB traction bar setup (sold)
full BNIB witbushing set (sold)
MS'n'S V2.2 comes with everything needed (sensor etc) (Sold)
Stock Oil pan (sold)
on with the pic:
BNIB AEM uego wideband
(Pic to come)
Powdercoated Mazda front Valve cover
Set of really clean stock KLDE Head
Curve Neck Manifold
Cam pulley
Stock KLDE CAM
D1 Extended Lug nut
Last edited by pattheriault on September 10th, 2014, 5:58 pm, edited 14 times in total.
-
- Regular Member
- Posts: 73
- Joined: October 21st, 2011, 7:24 pm
- antispam: ~SPAM*SUX~
- Location: Hamilton, Ontario
Re: [FS] Turbo,Traction bars, bushing,fuel etc.
What traction bar setup do you have? And what type of bushing are those in that set?
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [FS] Turbo,Traction bars, bushing,fuel etc.
Great list!! I wish I had the cash, I would snag the WBO2
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Re: [FS] Turbo,Traction bars, bushing,fuel etc.
heres the link for original group buy for bushing and traction bar
http://mx-3.com/phpBB3/viewtopic.php?f=12&t=67487
http://mx-3.com/phpBB3/viewtopic.php?f= ... ction+bars
http://mx-3.com/phpBB3/viewtopic.php?f=12&t=67487
http://mx-3.com/phpBB3/viewtopic.php?f= ... ction+bars
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Re: [FS] Turbo,Traction bars, bushing,fuel etc.
Bump! got a deposit on the car! this stuff must go to make sure I dont get an other one haha!
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Re: [FS] Turbo,Traction bars, bushing,fuel etc.
No interest in a nice reliable turbo kit? Everything you need here to boost an kl mx3?
way nicer kit than ebay.
will make a nice deal if someone get everything turbo related. Fuel and turbo!
way nicer kit than ebay.
will make a nice deal if someone get everything turbo related. Fuel and turbo!
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Re: [FS] Turbo,Traction bars, bushing,fuel etc.
MS is sold!
Negotiable on price! everything must go! no more KL car.
Negotiable on price! everything must go! no more KL car.
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Re: [FS] Turbo,Traction bars, bushing,fuel etc.
Bump! updated list! would rather see this stuff go on a mx-3.com member than have to sell it on ebay!
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Re: [FS] Turbo,Traction bars, bushing,fuel etc.
updated list!
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Re: [FS] Turbo,Traction bars, bushing,fuel etc.
Bump! need everything gone
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Re: [FS] Turbo,Traction bars, bushing,fuel etc.
bump! very negotiable on price at this point need this gone
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Re: [FS] Turbo,Traction bars, bushing,fuel etc.
bump! moving need this stuff gone! turbo alone is worth 400-500$
- pattheriault
- Regular Member
- Posts: 211
- Joined: September 8th, 2008, 4:49 pm
- Location: New-Brunswick
Re: [FS] Turbo,Traction bars, bushing,fuel etc.
still have some of this stuff laying around.. make me an offer need some funds to put toward a banshee build
email me at pattheriault05 @ gmail . com as im rarely on here anymore
email me at pattheriault05 @ gmail . com as im rarely on here anymore