V6 Parts, ZE curve neck IM, Millenia VC, Heads & mor

[MazdaMiester]

Im basically parting out a '97 Millenia KL motor, 102k, has a rod knock(might be counterweight hitting piston skirt). I've also got a few other parts:

1. Ms-8 Curve neck ZE intake manifold. Cleaned inside and out, comes with fuel injectors, VRIS solenoids and actuators. No EGR valve. with the manifold im including the EGR pipe along with the rear exhaust manifold. I dont have the TB. Includes good TB gasket and the Intake manifold gaskets from the motor. $130+shipping Pictures comming soon.

2. 2.5 KL "mazda 24v DOHC V6" front valve cover, 100% cleaned. with bolts $75 shipped obo. pics comming

3. KLDE Intake manifold, '93, Polished to a mirror finish outside(on all major surfaces), knife edged inside, includes VRIS actuators. No fuel injectors or rails. $125 shipped...here are a few pics: <img src="http://memimage.cardomain.com/member_im ... 5_full.jpg" alt=" - " />
<img src="http://memimage.cardomain.com/member_im ... 6_full.jpg" alt=" - " />
<img src="http://memimage.cardomain.com/member_im ... 2_full.jpg" alt=" - " />

4. 2.5 KL heads, square port DE heads, they have the KL101 and KL1A1 coding, so they are DE heads, these came from that millenia motor, 102k, no cracks, not warped. not sure if the valve train is DE or ZE. comes with a set of KL01 cams and journals $145 obo +shipping

5. 2.5 KLDE mazda front valve cover, Polished to a mirror finish on the top surfaces, rest painted with hitemp silver to even out aluminum color. $55 shipped...here is a pic: <img src="http://memimage.cardomain.com/member_im ... 3_full.jpg" alt=" - " />

6. KLDE Vris Solenoids, no broken nipples, on bracket with other solenoid. $18+shipping

7. JE-50 VAF's, two of them, Tested good $55 shipped each.

8. KL rear valve cover $15+shipping no cracks

9. KL Oil dipstick $10+shipping.

10. KLDE throttle body 100% cleaned inside and out. with IAC, but no TPS $35 shipped.

If there is anything else you need from that engine, let me know.

I ship everything through fedex thats over 2lbs. My email is Juslisn2me@aol.com.

-Eric

[Golliwog]

I emailed you about the curved neck manifold last week, but still haven't gotten a response. Still available?