any recommendations for a new clutch for my mazda mx-3 getting a DE in 3 weeks?? Post me a link if its online or tell me the name.
I was just going to get a stock clutch from my auto parts store. I'm assuming I should order one for my original tranny that i'll be using or should i order one for a mazda mx-6??
Clutch Kit for KLDE. Reccomendations??
- mikeetown
- Regular Member
- Posts: 357
- Joined: October 27th, 2009, 4:52 pm
- antispam: No
- Location: kelowna B.C.
Clutch Kit for KLDE. Reccomendations??
mikeetown
93 Black GS - J-spec KLDE, CLEAN CAR
92 Red GS - J-spec K8ZE, stripped interior - Written off
2004 Infinity G35 Track Edition - 6 speed manual
viewtopic.php?f=17&t=79142
93 Black GS - J-spec KLDE, CLEAN CAR
92 Red GS - J-spec K8ZE, stripped interior - Written off
2004 Infinity G35 Track Edition - 6 speed manual
viewtopic.php?f=17&t=79142
-
wytbishop
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: Clutch Kit for KLDE. Reccomendations??
MX-3 clutch is fine with the MX-6 flywheel. I have been using a Exidy stock replacement I got off ebay for $100 for 3 years on my ZE and it's holding up great.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
- MrMazda92
- Supporting Member
- Posts: 5203
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: Clutch Kit for KLDE. Reccomendations??
Use the MX-3 flywheel... Trust me, and use a KL clutch. The one wytbishop is recommending is the Exedy OEM replacement for a KL, not a K8, unless I'm mistaken.
Daily:
'12 Challenger R/T - Stroker (Fully Counterweighted), Magnuson 2650 blower (7 PSI), Skip-Shift/CDV deleted, StopTech ST60 front brakes, Hellcat rear cradle, 2 piece DS. 6 speed, 3.9 LSD, 18" wheels - 510 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MS/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T - Stroker (Fully Counterweighted), Magnuson 2650 blower (7 PSI), Skip-Shift/CDV deleted, StopTech ST60 front brakes, Hellcat rear cradle, 2 piece DS. 6 speed, 3.9 LSD, 18" wheels - 510 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MS/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
- Nd4SpdSe
- Senior Member
- Posts: 11213
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: Clutch Kit for KLDE. Reccomendations??
Mx-3 peeps have used Mx-6 clutches for a long time. They used to be cheaper and 10mm larger in diameter to grab that little bit extra. Some companies list the exact same clutch for the K8 as for the KL.
Mx-6/Probe peeps have been using Mx-3 flywheels in their cars forever as well since it's a cheap upgrade for a lighter flywheel.
The Exedy clutch seems to be well proven around here for price, streetability and durability. I don't think I've heard of anyone have any problems with them. Back in the day, it was said that the OEM KLDE clutch barely handled the OEM motor well and it wasn't recommended.
Myself, I ran a Bully Stage 2 Mx-6 clutch on my Mx-3's original flywheel.
With clutches, use any that you wish, as long as it's a reputable brand. Stay away from the eBay "F1 Racing" ones...
Mx-6/Probe peeps have been using Mx-3 flywheels in their cars forever as well since it's a cheap upgrade for a lighter flywheel.
The Exedy clutch seems to be well proven around here for price, streetability and durability. I don't think I've heard of anyone have any problems with them. Back in the day, it was said that the OEM KLDE clutch barely handled the OEM motor well and it wasn't recommended.
Myself, I ran a Bully Stage 2 Mx-6 clutch on my Mx-3's original flywheel.
With clutches, use any that you wish, as long as it's a reputable brand. Stay away from the eBay "F1 Racing" ones...
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: Clutch Kit for KLDE. Reccomendations??
How about the rx7 clutch ? I think i've heared about using some rx7 combination as well.
- mikeetown
- Regular Member
- Posts: 357
- Joined: October 27th, 2009, 4:52 pm
- antispam: No
- Location: kelowna B.C.
Re: Clutch Kit for KLDE. Reccomendations??
Thank you everyone for the great advice. i now know exactly what i must do. DE mx3 here i come!
mikeetown
93 Black GS - J-spec KLDE, CLEAN CAR
92 Red GS - J-spec K8ZE, stripped interior - Written off
2004 Infinity G35 Track Edition - 6 speed manual
viewtopic.php?f=17&t=79142
93 Black GS - J-spec KLDE, CLEAN CAR
92 Red GS - J-spec K8ZE, stripped interior - Written off
2004 Infinity G35 Track Edition - 6 speed manual
viewtopic.php?f=17&t=79142
- Nd4SpdSe
- Senior Member
- Posts: 11213
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: Clutch Kit for KLDE. Reccomendations??
Kinda exotic for no real reason. Exedy KL ressure plate w/ and ACT 6-Puck for the FC Rx7. It's an affortable combination if your making over 300hp; that's hppwdn's combo for his turbo KL.WhiteFinish wrote:How about the rx7 clutch ? I think i've heared about using some rx7 combination as well.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: Clutch Kit for KLDE. Reccomendations??
It's a great combo for 300bhp range. Also without the heaviness or brutality of the usual stage 3 / 6 puck, much preferred it to my spec stage 3.
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog

Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
