CS mazdaspeed front bumer with MS3 grill pic

jaydog is back · Post by **jaydog is back** » October 2nd, 2012, 10:51 pm

Ahh no, thats not the case with mine. I believe thats the way it came out of the mould.

kulluminati777 · Post by **kulluminati777** » October 3rd, 2012, 9:32 am

yeah i have mine on correctly as well and it fits a little weird. Thats another reason i was wanting the actual MS nose. On the drive side fender the nose doesnt connect all the way to the mounting point but i hope to get that fixed soon.

Josh · Post by **Josh** » October 3rd, 2012, 12:55 pm

Well with aftermarket fiberglass parts sometimes that is the case. when they clean up the product after they pull it from the mold they grind and sometimes its just a little too much.

That is the way my little brothers wide body kit was for his CRX, they spent a month refitting and fiber glassing the kit to fit the car, and it still is not 100%, but is the best fitted kit of that kind I have seen on a CRX.

Thefez · Post by **Thefez** » October 6th, 2012, 12:51 pm

stil no picture:(

MrMazda92 · Post by **MrMazda92** » October 6th, 2012, 9:20 pm

Seriously! I keep coming back, and getting my hopes up... It's like how people feel when they look at my worklog!

kulluminati777 · Post by **kulluminati777** » October 7th, 2012, 7:49 am

MrMazda92 wrote:Seriously! I keep coming back, and getting my hopes up... It's like how people feel when they look at my worklog!

MrMazda92 · Post by **MrMazda92** » October 7th, 2012, 11:38 pm

Hey! For what it's worth, I uploaded some freakin' pictures finally!

xxxmonoxidechild · Post by **xxxmonoxidechild** » October 10th, 2012, 9:24 pm

Fuuuuuuk!

was hoping for a pic to finally be uploaded. guess ill check back again next week.

MrMazda92 · Post by **MrMazda92** » October 11th, 2012, 1:28 am

Yeah, I googled the MS3 grill, and it honestly didn't look like a perfect fit... It looked like it might work, with modification, as is the norm for MX-3 owners.

kulluminati777 · Post by **kulluminati777** » October 17th, 2012, 7:26 am

Im still interested to see pics.....

MrMazda92 · Post by **MrMazda92** » October 17th, 2012, 4:13 pm

Yeah, if it looks good and fits up well, I can avoid going a custom route for mine. I'm planning to put it on as soon as I find out...

wertys · Post by **wertys** » October 19th, 2012, 3:55 pm

its quite simple and not too flashy, thats what i like!
here guys thats a ms3 front mesh doesnt look like much but its way better than the others.

MrMazda92 · Post by **MrMazda92** » October 19th, 2012, 11:48 pm

Not too bad!

How was fitment? What did you do to mount it? Is that the stock grill for the top section?

wertys · Post by **wertys** » October 20th, 2012, 12:39 am

top section is stock, unfortunately i couldnt find anything worth it to put there and as for the mounting on the lower grill, I have fiberglass bumps molded all over the mesh hole from the inside and just hold it there with metal cord.

MrMazda92 · Post by **MrMazda92** » October 20th, 2012, 4:26 am

Thank you kindly! I'll look into it, I need to find one on the cheap now.

MX-3.com

CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic

Re: CS mazdaspeed front bumer with MS3 grill pic