Evo_Spec's 1994 BP-T RS

In this section, Users can post worklogs for their vehicle and show users their projects. (MX-3 ONLY!). Please create only ONE topic when starting a project, and DO NOT create 2 worklogs for the same vehicle, even though they are different projects. READ THE STICKY!
User avatar
Evo_Spec
Senior Member
Posts: 2504
Joined: December 30th, 2008, 3:41 am
Location: Calgary, Alberta, Canada

Re: Evo_Spec's 1994 BP-T RS

Post by Evo_Spec »

pox wrote:Good thing, hah. Gates racing belt ftw!
i'm too cheap, i just got a regular Gates belt because it came with the idler and tensioner for like 40 bux
Non-interference engines FTW!
User avatar
Evo_Spec
Senior Member
Posts: 2504
Joined: December 30th, 2008, 3:41 am
Location: Calgary, Alberta, Canada

Re: Evo_Spec's 1994 BP-T RS

Post by Evo_Spec »

good news! I finished putting on the crank pulley and belts and topped her up the coolant and she runs without leaking!
bad news is i might need a new battery.....

now i just gotta bolt on the splash guards and put the headlights and bumper back on and she'll be back to driving condition!

It's so good to hear her voice again =D
User avatar
pox
Regular Member
Posts: 360
Joined: February 11th, 2007, 10:52 pm
Location: MA, 01151
Contact:

Re: Evo_Spec's 1994 BP-T RS

Post by pox »

Sweet, congrats man.
Took the bp+t out of the mx and swapped it into a 95 escort wagon. ;)
User avatar
Evo_Spec
Senior Member
Posts: 2504
Joined: December 30th, 2008, 3:41 am
Location: Calgary, Alberta, Canada

Re: Evo_Spec's 1994 BP-T RS

Post by Evo_Spec »

so here's a crappy picture of when i was done putting everything in.
Image

So after i was done everything (minus the headlights and bumper) since i parked it over snow, the snow melted and refroze and created a nice layer of ice under each drive tire so i whipped out a couple a big pots of boiling water but that didn't really work, so i shoveled behind the car to get more back and forth room which didn't even benefit me since when i tried it got loose and i somehow ended up with the car turned around but in the driveway, so whatever, i'm happy!
Image
The aftermath of 2-3 hours of trying to get out
Image
so she's out and waiting for her bumper and headlights, then i gotta go get it re-registered and she'll be back on the road!
User avatar
Evo_Spec
Senior Member
Posts: 2504
Joined: December 30th, 2008, 3:41 am
Location: Calgary, Alberta, Canada

Re: Evo_Spec's 1994 BP-T RS

Post by Evo_Spec »

put the bumper and headlights back on last night and couldn't resist so i took her for an illegal unregistered spin around the block (sorry officers -_-) and man is she quick.....at least compared to the celica
User avatar
Tavman_1213
Regular Member
Posts: 412
Joined: September 2nd, 2011, 6:13 pm
antispam: ~SPAM*SUX~
Location: Calgary, AB, Canada

Re: Evo_Spec's 1994 RS

Post by Tavman_1213 »

Evo_Spec wrote:pics of the new hope for my car and also a new toy!

Image

Image

not sure what i'm doing with the 323, thinking about swapping both engines so i can have 2 running cars =D
Hey Evo I know this is an old picture but I like the custom "Melted" part of the bumper in this picture!!!
93 White RS- BPT Built not bought!!
Worklog: viewtopic.php?f=46&t=78988
User avatar
Evo_Spec
Senior Member
Posts: 2504
Joined: December 30th, 2008, 3:41 am
Location: Calgary, Alberta, Canada

Re: Evo_Spec's 1994 BP-T RS

Post by Evo_Spec »

not sure where your talking about since i only had this car for probably about 36 hours before it was ripped apart and scrapped XD
User avatar
Tavman_1213
Regular Member
Posts: 412
Joined: September 2nd, 2011, 6:13 pm
antispam: ~SPAM*SUX~
Location: Calgary, AB, Canada

Re: Evo_Spec's 1994 BP-T RS

Post by Tavman_1213 »

I know the previous owner of that car very well!! It was Colin Etsell a very good friend of mine!!!! The mark that I am talkin about is in the bottom left hand corner of that photo I reposted!! He had melted the bumper with a spot light right after he did that motor swap!!
93 White RS- BPT Built not bought!!
Worklog: viewtopic.php?f=46&t=78988
User avatar
Evo_Spec
Senior Member
Posts: 2504
Joined: December 30th, 2008, 3:41 am
Location: Calgary, Alberta, Canada

Re: Evo_Spec's 1994 BP-T RS

Post by Evo_Spec »

Tavman_1213 wrote:I know the previous owner of that car very well!! It was Colin Etsell a very good friend of mine!!!! The mark that I am talkin about is in the bottom left hand corner of that photo I reposted!! He had melted the bumper with a spot light right after he did that motor swap!!
oh is that what it was, again i had the car for a very short period of time so i never actually really looked at the car itself, just ripped the motor out and the parts i wanted from it and then it was taken from me but i got most of what i wanted off of it
and yeah i remember colin, great guy, put up with me texting him questions like 2 months after buying it from him XD
User avatar
Tavman_1213
Regular Member
Posts: 412
Joined: September 2nd, 2011, 6:13 pm
antispam: ~SPAM*SUX~
Location: Calgary, AB, Canada

Re: Evo_Spec's 1994 BP-T RS

Post by Tavman_1213 »

Haha yeah he's a good guy!! I have bugged him alot since I got this project!! I will probably do alot more of it too since its not done yet!!
93 White RS- BPT Built not bought!!
Worklog: viewtopic.php?f=46&t=78988
User avatar
Evo_Spec
Senior Member
Posts: 2504
Joined: December 30th, 2008, 3:41 am
Location: Calgary, Alberta, Canada

Re: Evo_Spec's 1994 BP-T RS

Post by Evo_Spec »

Tavman_1213 wrote:Haha yeah he's a good guy!! I have bugged him alot since I got this project!! I will probably do alot more of it too since its not done yet!!
this project? which project? i've never heard of it!
you have to make a worklog with pictures now =D
User avatar
Tavman_1213
Regular Member
Posts: 412
Joined: September 2nd, 2011, 6:13 pm
antispam: ~SPAM*SUX~
Location: Calgary, AB, Canada

Re: Evo_Spec's 1994 BP-T RS

Post by Tavman_1213 »

Oh I have pictures but have been to lazy to start a work log!! I guess I should though!! Oh an I guess my car is the fourth car in Calgary to have the raised spoiler(from what I have seen on this forum)!!
93 White RS- BPT Built not bought!!
Worklog: viewtopic.php?f=46&t=78988
RobMinhas
Regular Member
Posts: 1614
Joined: November 5th, 2011, 8:32 pm
antispam: ~SPAM*SUX~
Location: Calgary, Alberta

Re: Evo_Spec's 1994 BP-T RS

Post by RobMinhas »

Make that worlklog Tav! Show off that awesome car you've got and that rare body kit.
Daninski wrote:This is my MX3. There are many like it, but this one is mine. My MX3 is my best friend. It is my life. I must master it as I master my life. My MX3, without me, is useless. Without my MX3, I am useless. I must fire up my MX3 true. I must drive straighter than any Honda driver who is trying to own me. I must own him before he owns me.
User avatar
Tavman_1213
Regular Member
Posts: 412
Joined: September 2nd, 2011, 6:13 pm
antispam: ~SPAM*SUX~
Location: Calgary, AB, Canada

Re: Evo_Spec's 1994 BP-T RS

Post by Tavman_1213 »

The rare body kit that I can't find anywhere and which I would trade for stock hahaha
93 White RS- BPT Built not bought!!
Worklog: viewtopic.php?f=46&t=78988
RobMinhas
Regular Member
Posts: 1614
Joined: November 5th, 2011, 8:32 pm
antispam: ~SPAM*SUX~
Location: Calgary, Alberta

Re: Evo_Spec's 1994 BP-T RS

Post by RobMinhas »

Rare is rare man. If you're willing to pay to paint I'm sure you can find a good quality stock rear and front bumper around and here, you could cover the cost with the body kit easily.
Daninski wrote:This is my MX3. There are many like it, but this one is mine. My MX3 is my best friend. It is my life. I must master it as I master my life. My MX3, without me, is useless. Without my MX3, I am useless. I must fire up my MX3 true. I must drive straighter than any Honda driver who is trying to own me. I must own him before he owns me.
Post Reply

Return to “MX-3 Worklogs”