[WTB] 323F Spindles, Exedy Clutch Kit
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
[WTB] 323F Spindles, Exedy Clutch Kit
Wanted To Buy:
323F(Lantis) Front Spindles
- Trying to keep within budget, so cheap shipping is a must. Not in any hurry, the slow boat will do!
Exedy Clutch Kit - KL Engine
- Clutch Disc
- Pressure Plate
- Bearings
- Alignment Tool
For shipping quotes: I am located in Eugene, OR; 97402
323F(Lantis) Front Spindles
- Trying to keep within budget, so cheap shipping is a must. Not in any hurry, the slow boat will do!
Exedy Clutch Kit - KL Engine
- Clutch Disc
- Pressure Plate
- Bearings
- Alignment Tool
For shipping quotes: I am located in Eugene, OR; 97402
Last edited by MrMazda92 on December 27th, 2012, 3:16 pm, edited 81 times in total.
-
- Regular Member
- Posts: 1523
- Joined: March 8th, 2010, 7:21 pm
- antispam: ~SPAM*SUX~
- Location: Canandaigua, NY
Re: [WTB] Stock GS springs and more!
On your hatch trim are you looking for the piece on the hatch itself or the actual cover over the latch on the body? If your after the bottom section I could help you out.
92 GS gold (driver) worklog> http://mx-3.com/phpBB3/viewtopic.php?f=46&t=73405" onclick="window.open(this.href);return false;
93 GS red (wrecked)
I modify my ride so I can drive around the stupid people
93 GS red (wrecked)
I modify my ride so I can drive around the stupid people
Re: [WTB] Stock GS springs and more!
You don't want my euro bumper, do you
- Hoodzy
- Regular Member
- Posts: 1526
- Joined: February 19th, 2005, 4:15 pm
- Location: Calgary, Alberta
- Contact:
Re: [WTB] Stock GS springs and more!
Question.. how does having a sunroof change your suspension set up??
http://www.cardomain.com/id/hoodzy13" onclick="window.open(this.href);return false;
http://www.id-studio.ca" onclick="window.open(this.href);return false;
http://www.behance.net/CollinH" onclick="window.open(this.href);return false;
1995 Creek Mica Blue GS
http://www.id-studio.ca" onclick="window.open(this.href);return false;
http://www.behance.net/CollinH" onclick="window.open(this.href);return false;
1995 Creek Mica Blue GS
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [WTB] Stock GS springs and more!
Cleaned
Last edited by MrMazda92 on May 14th, 2012, 6:53 pm, edited 1 time in total.
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [WTB] Body, Interior, Engine/Perf, MSnS, Rare OEM?
Big ol' bump and update for a fine list of parts.
Last edited by MrMazda92 on January 30th, 2012, 9:11 pm, edited 1 time in total.
-
- Regular Member
- Posts: 1523
- Joined: March 8th, 2010, 7:21 pm
- antispam: ~SPAM*SUX~
- Location: Canandaigua, NY
Re: [WTB] Body, Interior, Engine/Perf, MSnS, Rare OEM?
gonna try and get you a shipping update soon. Oh and the only cover I have ever seen Oem Mx-3 is on my parts car but it needs repair.
92 GS gold (driver) worklog> http://mx-3.com/phpBB3/viewtopic.php?f=46&t=73405" onclick="window.open(this.href);return false;
93 GS red (wrecked)
I modify my ride so I can drive around the stupid people
93 GS red (wrecked)
I modify my ride so I can drive around the stupid people
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: [WTB] Body, Interior, Engine/Perf, MSnS, Rare OEM?
I'm probably going to be getting MSnS from these guys: http://www.stratifiedauto.com/index.php ... cts_id=213
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: [WTB] Body, Interior, Engine/Perf, MSnS, Rare OEM?
There is no such thing as Interprep retainers.
You might want to look into R&D chromely retainers, but they are custom orderd. (about 250$)
Look at my Euro sale topic. I think I'm able to locate another towhook.
It would depend how much rust you think is acceptable.
You might want to look into R&D chromely retainers, but they are custom orderd. (about 250$)
Look at my Euro sale topic. I think I'm able to locate another towhook.
It would depend how much rust you think is acceptable.
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [WTB] Body, Interior, Engine/Perf, MSnS, Rare OEM?
I forget who else made retainers, but there was another aftermarket company that I mistook for Interprep. Thanks for the reminder!WhiteFinish wrote:There is no such thing as Interprep retainers.
You might want to look into R&D chromely retainers, but they are custom orderd. (about 250$)
Look at my Euro sale topic. I think I'm able to locate another towhook.
It would depend how much rust you think is acceptable.
Well, surface rust is no problem for me... I have a grinder and don't mind getting my hands dirty. If it's rusted through, then I'll have to pass.
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [WTB] Body, Interior, Engine/Perf, MSnS, Rare OEM?
ThanksSleeper6 wrote:gonna try and get you a shipping update soon. Oh and the only cover I have ever seen Oem Mx-3 is on my parts car but it needs repair.
If you're interested in selling the cover, I'd like to see pics...
Last edited by MrMazda92 on January 30th, 2012, 9:11 pm, edited 1 time in total.
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [WTB] Body, Interior, Engine/Perf, MSnS, Rare OEM?
Mark, I liked the look of their systems, but they're out of my price range at the moment. That's my primary reasoning for going with used, and the fact that I get to trade with fine folk on the forums of course
Last edited by MrMazda92 on January 30th, 2012, 9:11 pm, edited 1 time in total.
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [WTB] Body, Interior, Megasquirt, Suspension
Parts removed, parts added, updated basically.
Last edited by MrMazda92 on January 30th, 2012, 9:11 pm, edited 1 time in total.
-
- Junior Member
- Posts: 23
- Joined: July 19th, 2010, 9:54 am
- antispam: ~SPAM*SUX~
- Location: Gloucester, UK
Re: [WTB] Body, Interior, Megasquirt, Suspension
If you have good connections within the Shipping industry, I have 2 Euro Bumpers, 1 Bumper support and 2 Sets of Fog Lights that are spare..
Issue i have is no-one will ship the Bumpers from the UK!!!!
Issue i have is no-one will ship the Bumpers from the UK!!!!
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [WTB] Body, Interior, Megasquirt, Suspension
I have no shipping connections, but I'm positive others here might have suggestions...
I've sourced a bumper, and am making payments for it(and other things), but I'm definitely interested in the bumper support! How much would you be looking for, before shipping?
Thanks!
I've sourced a bumper, and am making payments for it(and other things), but I'm definitely interested in the bumper support! How much would you be looking for, before shipping?
Thanks!
Last edited by MrMazda92 on January 30th, 2012, 9:11 pm, edited 1 time in total.