water temp sensor

V6 Technical/Performance Discussions
Post Reply
ninja_man
Regular Member
Posts: 74
Joined: August 5th, 2009, 11:58 pm
antispam: No

water temp sensor

Post by ninja_man »

so i have been driving my 93 with the klde swap for a while and still having a little problem with it. i have the klde inlet tube on the motor and it only has the water temp sending unit. and one of the water temp sensors that tells the ecm how hot or cold it is. not haveing bouth temp sensors hooked up, would that make it run rich or funny.
93 mx-3 with a klde swap. still working on
94 cobra svt. mostly stock.
08 ninja. 1 wheel fun. lol
User avatar
Newfie_dan
Regular Member
Posts: 570
Joined: April 25th, 2006, 12:02 am
Location: Saskatoon, SK
Contact:

Re: water temp sensor

Post by Newfie_dan »

if your using the original ec, then yes it will make it run rich and funny for sure, if anything swap out the sending unit for the ecm one and use that 1. the sending unit 1 is for dash only not the ecm, without the 1 for the ecm the car will not turn the fan on like it should (it goes into default mode) and it throws off the air fuel mix in addition it can make the idle surge on you.
Post Reply

Return to “V6 Technical/Performance”