HELP!!!
-
- Junior Member
- Posts: 11
- Joined: January 15th, 2009, 2:39 pm
HELP!!!
So here is my problem. My car was running fine(92 mx3/klze) and then the other day it wouldnt start it would turn over but not start. So i tryed bumping it and it didnt satrt but then i tryed turning it over after bumping it and it started. It has done this thre times already only when its cold. When its hot it starts fine???????? I dont know where to satrt any advice will help please.
Re: HELP!!!
sounds like a buggered starter motor,
but pull ur ecu codes as well might be a couple of things that together stop it from working
but pull ur ecu codes as well might be a couple of things that together stop it from working
-
- Junior Member
- Posts: 11
- Joined: January 15th, 2009, 2:39 pm
Re: HELP!!!
Thats the thing the starter is fine it cranks and everything it just wont run
- Ryan
- Senior Member
- Posts: 7199
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: HELP!!!
It could be 1000 things.
Did you pull codes?
The disty, and crank/cam/knock/airflow sensors could do this, the ECM, anything fuel related... its a massive list.
Did you pull codes?
The disty, and crank/cam/knock/airflow sensors could do this, the ECM, anything fuel related... its a massive list.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
-
- Junior Member
- Posts: 11
- Joined: January 15th, 2009, 2:39 pm
Re: HELP!!!
The guy i bought it off of took out the check engine light so tomorrow at work ill try to pull the codes and see.