[FS] g-series tranny/clutch/axles/mount/linkage
-
- Regular Member
- Posts: 174
- Joined: November 3rd, 2005, 1:31 am
[FS] g-series tranny/clutch/axles/mount/linkage
Just like the title says
i've got a low k (160,000km) transmission up for grabs, i dont have any pictures of it since the engine/tranny are still in the car, but i've sold the motor (pick up is on sunday).
Axles are oem, no clicking, no boot damage.
Transmission shifts nice a smooth, has new fluid in it too.
Mount shows no signs of excessive wear, just some surface rust due to age.
Clutch grabs strong, it was replaced under 40,000km ago.
Linkage is PERFECT, no play, no damage, no problems. All new bushings.
Clutch line was replaced when the clutch was done.
Slave cylinder was done with the clutch & line.
Has new OEM axles seals as well.
I'm open to offers, i'll post some pics on sunday when it's out...until then i can take some pics of it inside the car it that works.
London, Ontario.
JACK.
i've got a low k (160,000km) transmission up for grabs, i dont have any pictures of it since the engine/tranny are still in the car, but i've sold the motor (pick up is on sunday).
Axles are oem, no clicking, no boot damage.
Transmission shifts nice a smooth, has new fluid in it too.
Mount shows no signs of excessive wear, just some surface rust due to age.
Clutch grabs strong, it was replaced under 40,000km ago.
Linkage is PERFECT, no play, no damage, no problems. All new bushings.
Clutch line was replaced when the clutch was done.
Slave cylinder was done with the clutch & line.
Has new OEM axles seals as well.
I'm open to offers, i'll post some pics on sunday when it's out...until then i can take some pics of it inside the car it that works.
London, Ontario.
JACK.
.::Mazda::speeD::.
working on the 2nd part![Wink ;)](./images/smilies/icon_wink.gif)
working on the 2nd part
![Wink ;)](./images/smilies/icon_wink.gif)
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: [FS] g-series tranny/clutch/axles/mount/linkage
what would it take to get you to toss the clutch line and slave cylinder in with the rest of my stuff?
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: [FS] g-series tranny/clutch/axles/mount/linkage
This is for a GS? (not a swapped g series into an RS)? I am interested in the linkage, but I don't need the bushings. I need the solid piece that connects to the tranny that holds the whole thing steady. (The one next to the shift fork) If you have to ship it/ sell it together, thats fine. How much do you want for this? How much is shipping to Potsdam, NY 13676?
-
- Regular Member
- Posts: 174
- Joined: November 3rd, 2005, 1:31 am
Re: [FS] g-series tranny/clutch/axles/mount/linkage
This is for B series 4 cylinder engines.
.::Mazda::speeD::.
working on the 2nd part![Wink ;)](./images/smilies/icon_wink.gif)
working on the 2nd part
![Wink ;)](./images/smilies/icon_wink.gif)
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
-
- Regular Member
- Posts: 174
- Joined: November 3rd, 2005, 1:31 am
Re: [FS] g-series tranny/clutch/axles/mount/linkage
Looking for $250 package deal. Or:
Transmission w/mount---------$150
Clutch------------------------$60
Linkage-----------------------$65
Slave cyl/clutch line-----------$25
Axles-------------------------$60
So you'd be saving a lot of $$ by getting the package deal![Smile :)](./images/smilies/icon_smile.gif)
London, Ontario.
JACK.
Transmission w/mount---------$150
Clutch------------------------$60
Linkage-----------------------$65
Slave cyl/clutch line-----------$25
Axles-------------------------$60
So you'd be saving a lot of $$ by getting the package deal
![Smile :)](./images/smilies/icon_smile.gif)
London, Ontario.
JACK.
.::Mazda::speeD::.
working on the 2nd part![Wink ;)](./images/smilies/icon_wink.gif)
working on the 2nd part
![Wink ;)](./images/smilies/icon_wink.gif)
-
- Regular Member
- Posts: 174
- Joined: November 3rd, 2005, 1:31 am
Re: [FS] g-series tranny/clutch/axles/mount/linkage
i'll throw a re-loomed BP harness, ecu, vaf and all my other 'bp swap' goodies in for a grand total of $320obo.
that's one hell of a savings lol
wrecker prices
wiring harness w/ fuse box--------$85
bp ecu---------------------------$40
bp vaf---------------------------$30
engine mounts-------------------$20
so for an extra $70 with the tranny swap, you're getting all that!!!
JACK.
that's one hell of a savings lol
wrecker prices
wiring harness w/ fuse box--------$85
bp ecu---------------------------$40
bp vaf---------------------------$30
engine mounts-------------------$20
so for an extra $70 with the tranny swap, you're getting all that!!!
JACK.
.::Mazda::speeD::.
working on the 2nd part![Wink ;)](./images/smilies/icon_wink.gif)
working on the 2nd part
![Wink ;)](./images/smilies/icon_wink.gif)
- 10secSim
- Regular Member
- Posts: 145
- Joined: May 30th, 2006, 6:42 pm
- Location: Cornwall, Ontario, Canada
Re: [FS] g-series tranny/clutch/axles/mount/linkage
I'm intrested in the trans package deal for 250$...how much do you think you can ship it for to cornwall, On K6H 3X4
B6 1.6L DOHC, CAI, custom intake mani. with internal velocity stacks, 65mm thottle body, probe 4-2-1 header, custom 2.5" high flow exhaust, Centerforce dual friction, MS2, MSD 6A, Tokico struts, EIBACH springs.
http://www.cardomain.com/ride/2443642" onclick="window.open(this.href);return false;
http://www.cardomain.com/ride/2443642" onclick="window.open(this.href);return false;
-
- Regular Member
- Posts: 174
- Joined: November 3rd, 2005, 1:31 am
Re: [FS] g-series tranny/clutch/axles/mount/linkage
it's all gone, sorry.
.::Mazda::speeD::.
working on the 2nd part![Wink ;)](./images/smilies/icon_wink.gif)
working on the 2nd part
![Wink ;)](./images/smilies/icon_wink.gif)