I just removed all of my A/C lines, condenser, compressor, etc. and I have no use for them. I see some compressors going for well over 200 on eBay. The only line I was able to salvage without sawing off is the line that comes from the evaporator and goes into the small canaster under the intake. Although I did some sawing, the condenser does have the fitting still attached as I cut the line before the line entered the fitting (too hard to reach). Therefore, the condensor and line mentioned above do have the proper fittings on them for installation. look down further for the floormats!
The compressor is listed on eBay as of now, but I would sell it for less on here to anyone that wanted it. The link is: http://cgi.ebay.com/ebaymotors/MX-3-GS- ... enameZWDVW" onclick="window.open(this.href);return false;
I'm looking to get around 40 plus shipping for the condensor but as far as the other parts, I am open to offers since I do not even know if they are parts people need. Let me know if anyone has any interest. Thanks for looking.
Last edited by mazdags94 on June 8th, 2008, 2:34 pm, edited 4 times in total.
'94 MX3 GS (black)-- 2.5L DE w/ straight neck IM, SSAC Headers, KYB-GR2's, Intrax Springs, CM Stage I clutch, OBX STS, filled front & rear mounts, CAI- SOLD
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false; viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
I would also be open to offers from anyone that might be looking for any of these parts.
'94 MX3 GS (black)-- 2.5L DE w/ straight neck IM, SSAC Headers, KYB-GR2's, Intrax Springs, CM Stage I clutch, OBX STS, filled front & rear mounts, CAI- SOLD
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false; viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
I wouldn't mind taking that AC compressor off your hands how about 85+shipping?
I'm not on here much, so if that sounds good just call/text me at 208-405-5902. Only thing is that i can only do money orders at the time. Does that work for you?
Blaze Red '92 K8 Mx-3 GS. Never got around to a ZE swap. SOLD
1997 Eagle Talon TSi AWD. Don't worry i'll come back around to the Mazda world.
'94 MX3 GS (black)-- 2.5L DE w/ straight neck IM, SSAC Headers, KYB-GR2's, Intrax Springs, CM Stage I clutch, OBX STS, filled front & rear mounts, CAI- SOLD
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false; viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
Also have a set of OEM floormats that are in MINT condition. They are the type with the plastic bottom w/ spikes as opposed to the cloth that rips and smeels after a while. I paid $70 for them from the mazda dealer. Asking $40 plus ship, canada is extra. PM if interested. Also, taking offers on a/c condensor and compressor!
'94 MX3 GS (black)-- 2.5L DE w/ straight neck IM, SSAC Headers, KYB-GR2's, Intrax Springs, CM Stage I clutch, OBX STS, filled front & rear mounts, CAI- SOLD
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false; viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
Waiting on your reply Jovian, if you don't want them then the sale will go to NinjaJim. Let me know either way if you could. Thanks.
NinjaJim, I'll keep you posted!
'94 MX3 GS (black)-- 2.5L DE w/ straight neck IM, SSAC Headers, KYB-GR2's, Intrax Springs, CM Stage I clutch, OBX STS, filled front & rear mounts, CAI- SOLD
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false; viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
Floormats are SOLD! Open to offers for the a/c parts (except evaporator).
'94 MX3 GS (black)-- 2.5L DE w/ straight neck IM, SSAC Headers, KYB-GR2's, Intrax Springs, CM Stage I clutch, OBX STS, filled front & rear mounts, CAI- SOLD
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false; viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"