Head Gaskets
Head Gaskets
Just to get a feel, what are some good quality head gaskets I could buy? I bought a complete gasket kit from an eBay store that includes the head gaskets, cam seals, valve cover gaskets, valve seals, those small rings for each bolt on the vavle covers, IM gaskets, and exhaust Mannifold gaskets. I plan on running the engine for about a couple years before I upgrade to the KLZE so if these will last me about 5 or so years, I'll be happy. I'm just concerned about poor quality head gaskets. Anyone have any suggestions or feedback?
'94 MX3 GS (black)-- 2.5L DE w/ straight neck IM, SSAC Headers, KYB-GR2's, Intrax Springs, CM Stage I clutch, OBX STS, filled front & rear mounts, CAI- SOLD ![Sad :(](./images/smilies/icon_sad.gif)
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false;
viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
![Sad :(](./images/smilies/icon_sad.gif)
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false;
viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
- 2fazed
- Supporting Member
- Posts: 1885
- Joined: May 21st, 2002, 2:01 am
- Location: La Selva Beach, California
- Contact:
Re: Head Gaskets
I think most people that buy gaskets and belts, buy them from Mazda dealership. It's probably hit and miss with these kinds of items. I think most people will say aftermarket isn't as good as OEM, just for these parts.
16 Hyundai Elantra Value Edition
06 Mazdaspeed6 2.3T
93 626 ES 2.5
92 Mx-3 RS 1.6
93 Mx-3 GS 2.5
93 Mx-3 RS 1.6
06 Mazdaspeed6 2.3T
93 626 ES 2.5
92 Mx-3 RS 1.6
93 Mx-3 GS 2.5
93 Mx-3 RS 1.6
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: Head Gaskets
If your worried that much, you're best bet is to just go OEM, that way, you have no questions. I think most people just get them OEM...especially hard to get to gaskets liek the head gasket, spend more now, pay less later and have the piece of mind of an OEm part.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- Ice Racing
- Regular Member
- Posts: 104
- Joined: November 7th, 2006, 11:31 pm
- Location: Québec
Re: Head Gaskets
OEM should always be your first choice, unless you know of an other well establish specialise compagnie that have proven higher quality product (High Performance), nothing comes free ![Crying :crying:](./images/smilies/crying.gif)
Personnally I do both![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Crying :crying:](./images/smilies/crying.gif)
Personnally I do both
![Very Happy :D](./images/smilies/icon_biggrin.gif)
GS KLZE FOR ICE RACING
Re: Head Gaskets
Yeah, my concern is mostly the head gaskets bc of the labor time involved. What has been the cost of OEM head gaskets these days?
'94 MX3 GS (black)-- 2.5L DE w/ straight neck IM, SSAC Headers, KYB-GR2's, Intrax Springs, CM Stage I clutch, OBX STS, filled front & rear mounts, CAI- SOLD ![Sad :(](./images/smilies/icon_sad.gif)
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false;
viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
![Sad :(](./images/smilies/icon_sad.gif)
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false;
viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
Re: Head Gaskets
You can probly get a Fel pro Head set for about $500 the set is high quality and this company makes alot of gaskets to fix manufactures defects.
Re: Head Gaskets
For that price I can see much more attraction to the ZE Swap
I think I'll use the one I have and get a few years out if it but then I'm definitely doing the ZE swap. Thanks everyone
![Laughing :lol:](./images/smilies/icon_lol.gif)
'94 MX3 GS (black)-- 2.5L DE w/ straight neck IM, SSAC Headers, KYB-GR2's, Intrax Springs, CM Stage I clutch, OBX STS, filled front & rear mounts, CAI- SOLD ![Sad :(](./images/smilies/icon_sad.gif)
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false;
viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
![Sad :(](./images/smilies/icon_sad.gif)
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false;
viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
- 93MX3KLZE-T
- Regular Member
- Posts: 49
- Joined: August 13th, 2007, 12:39 pm
- Location: Milwaukee, Wisconsin
Re: Head Gaskets
I've heard good things about the Hussy Copper Head Gaskets.
93 MX-3 GS, KL-ZE, T304E ***SOLD***
221.9 whp 219.0 wtq @ 5 psi untuned
13.4 @ 108 mph
221.9 whp 219.0 wtq @ 5 psi untuned
13.4 @ 108 mph
-
- Regular Member
- Posts: 63
- Joined: September 29th, 2007, 1:53 am
- Location: Cohutta, Georgia USA
Re: Head Gaskets
I have always used Fel Pro gaskets onany vehicle I have torn down and need to replace the gaskets. Have never had any problems with them on any vehicle domestic or import.
In some cases I feel that they are superior to OEM gaskets.
OldMan
In some cases I feel that they are superior to OEM gaskets.
OldMan