Drop Zone Lowering Springs.
Drop Zone Lowering Springs.
Slightly Used (~100 mi) Drop Zone Lowering Springs. These will go to the highest bidder or anyone that would like to trade even up for a set of approximately 1 inch lowering springs.<p>Thanks.<p>Jeremy
pulse1010@hotmail.com
pulse1010@hotmail.com
1992 White MX3 1.6l SOHC
- For Sale - 105,000 miles / 3,000 miles on engine
- Original B6 Bored 2 Over
- Centerforce Dual Friction Clutch
- Short Shifter
- Cross Drilled and Slotted Rotors
- KYB GR-2 Shocks/Struts
- Steel Braided Front Brake Lines
- Reverse indiglo gauges and carbon fiber trim
- Front and Rear Strut Tower Bars
- 17" Sumitomo Tires on Anthracite/Chrome Loco Wheels
- For Sale - 105,000 miles / 3,000 miles on engine
- Original B6 Bored 2 Over
- Centerforce Dual Friction Clutch
- Short Shifter
- Cross Drilled and Slotted Rotors
- KYB GR-2 Shocks/Struts
- Steel Braided Front Brake Lines
- Reverse indiglo gauges and carbon fiber trim
- Front and Rear Strut Tower Bars
- 17" Sumitomo Tires on Anthracite/Chrome Loco Wheels
- monstar-mx-3
- Regular Member
- Posts: 1112
- Joined: February 28th, 2002, 2:01 am
- Location: vancouver
Re: Drop Zone Lowering Springs.
What wrong with the? why selling them? I start the bidding at $60
-
- Regular Member
- Posts: 49
- Joined: December 22nd, 2001, 2:01 am
- Location: Oakville, Ontario
- Contact:
Re: Drop Zone Lowering Springs.
I will pay 80 but how about some pics? and slightly used what does that mean did you try to install them yourself or are they cut springs or what?
Re: Drop Zone Lowering Springs.
I have installed them myself. My car only has about 100 miles on it since I put the rebuilt SOHC in. <p>I think that the ride with these springs isn't bad... actually, it is pretty good. I just want to go with regular springs, since I will probably be running this car in some rallys this summer, I don't want to have quite as harsh a ride. And I'd doubt that I'll ever put them back on so rather than sit around my garage, they are going.<p>I haven't cut them. They are in as perfect of condition as they could possibly be for 100 miles of use.
1992 White MX3 1.6l SOHC
- For Sale - 105,000 miles / 3,000 miles on engine
- Original B6 Bored 2 Over
- Centerforce Dual Friction Clutch
- Short Shifter
- Cross Drilled and Slotted Rotors
- KYB GR-2 Shocks/Struts
- Steel Braided Front Brake Lines
- Reverse indiglo gauges and carbon fiber trim
- Front and Rear Strut Tower Bars
- 17" Sumitomo Tires on Anthracite/Chrome Loco Wheels
- For Sale - 105,000 miles / 3,000 miles on engine
- Original B6 Bored 2 Over
- Centerforce Dual Friction Clutch
- Short Shifter
- Cross Drilled and Slotted Rotors
- KYB GR-2 Shocks/Struts
- Steel Braided Front Brake Lines
- Reverse indiglo gauges and carbon fiber trim
- Front and Rear Strut Tower Bars
- 17" Sumitomo Tires on Anthracite/Chrome Loco Wheels
- monstar-mx-3
- Regular Member
- Posts: 1112
- Joined: February 28th, 2002, 2:01 am
- Location: vancouver
-
- Regular Member
- Posts: 397
- Joined: December 29th, 2002, 2:01 am
- Location: Toronto
Re: Drop Zone Lowering Springs.
how much do they lower ur car by? i'm interested.... name a price
BP POWERED MX-3
http://members.cardomain.com/bbprecidia
http://members.cardomain.com/bbprecidia
-
- Regular Member
- Posts: 145
- Joined: October 27th, 2002, 2:01 am
- Location: Lawrence, KS
- Contact:
Re: Drop Zone Lowering Springs.
you already lowered your car... what are you interested for?<p>If you are getting rid of the g/c coilovers i might be interested in a straight out trade with some $$ on my part. I have dropzones if interested in trade.
Re: Drop Zone Lowering Springs.
ok, ok, lets not digress here. i am trying to get rid of the coilovers i have... so where are we at? 81?
1992 White MX3 1.6l SOHC
- For Sale - 105,000 miles / 3,000 miles on engine
- Original B6 Bored 2 Over
- Centerforce Dual Friction Clutch
- Short Shifter
- Cross Drilled and Slotted Rotors
- KYB GR-2 Shocks/Struts
- Steel Braided Front Brake Lines
- Reverse indiglo gauges and carbon fiber trim
- Front and Rear Strut Tower Bars
- 17" Sumitomo Tires on Anthracite/Chrome Loco Wheels
- For Sale - 105,000 miles / 3,000 miles on engine
- Original B6 Bored 2 Over
- Centerforce Dual Friction Clutch
- Short Shifter
- Cross Drilled and Slotted Rotors
- KYB GR-2 Shocks/Struts
- Steel Braided Front Brake Lines
- Reverse indiglo gauges and carbon fiber trim
- Front and Rear Strut Tower Bars
- 17" Sumitomo Tires on Anthracite/Chrome Loco Wheels
Re: Drop Zone Lowering Springs.
If your going to rally then keep them.
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
My Cardomain site
- monstar-mx-3
- Regular Member
- Posts: 1112
- Joined: February 28th, 2002, 2:01 am
- Location: vancouver
Re: Drop Zone Lowering Springs.
check your email... like to work something out soon.. thanks..
1992 White MX3 1.6l SOHC
- For Sale - 105,000 miles / 3,000 miles on engine
- Original B6 Bored 2 Over
- Centerforce Dual Friction Clutch
- Short Shifter
- Cross Drilled and Slotted Rotors
- KYB GR-2 Shocks/Struts
- Steel Braided Front Brake Lines
- Reverse indiglo gauges and carbon fiber trim
- Front and Rear Strut Tower Bars
- 17" Sumitomo Tires on Anthracite/Chrome Loco Wheels
- For Sale - 105,000 miles / 3,000 miles on engine
- Original B6 Bored 2 Over
- Centerforce Dual Friction Clutch
- Short Shifter
- Cross Drilled and Slotted Rotors
- KYB GR-2 Shocks/Struts
- Steel Braided Front Brake Lines
- Reverse indiglo gauges and carbon fiber trim
- Front and Rear Strut Tower Bars
- 17" Sumitomo Tires on Anthracite/Chrome Loco Wheels
- monstar-mx-3
- Regular Member
- Posts: 1112
- Joined: February 28th, 2002, 2:01 am
- Location: vancouver
Re: Drop Zone Lowering Springs.
Jer: i didnt recieve anything email wise