[wtb] kl31 ecu

BornSticky · Post by **BornSticky** » October 8th, 2007, 11:33 pm

I just swapped klze engine and wanting to buy ecu not wanting to spend much more then 200

fieromx3 · Post by **fieromx3** » October 9th, 2007, 12:24 am

ze ecu sux but only comin from me imo but DE ecu is even better than a ZE ecu that ive tried.. and K8 ecu with kl-02 vaf is best imo spending the dough on a ze ecu isnt worth it as u can have just as good if not better performance with DE or K8 ecu

mx3autozam · Post by **mx3autozam** » October 9th, 2007, 12:33 am

Screw ZE ecu...keep stock k8 and get something like and SAFC and tune it the way you want. Way better than what fieromx3 said!

fieromx3 · Post by **fieromx3** » October 9th, 2007, 6:26 pm

screw safc! electromotive TEC3 with coil packs or full aem standalone! way better than what mx3autozam said!

Post by **Mooneggs** » October 10th, 2007, 9:37 am

I'm using a KL36 (modified with no limiters and autofans removed) on my curved neck KL01 cammed klze and I've never had an issue. However, I'm about to use a VR Tuner to fix the powerband issue...

Anyways ebay has these occasionally... this kl-31 ECU ends in 3 hours...

http://cgi.ebay.com/ebaymotors/JDM-MAZD ... enameZWDVW

and here's a kl36

http://cgi.ebay.com/ebaymotors/JDM-Mazd ... enameZWDVW

hgallegos915 · Post by **hgallegos915** » October 11th, 2007, 3:31 pm

Get a probinator chip. Its the cheapest and easiest way so far.

BornSticky · Post by **BornSticky** » October 11th, 2007, 4:25 pm

ill probably just keep my k8 one for a a little while see how it runs with it then look into it more then

if i do put in a kl31 or kl36 ecu do i have to put the klze disty back on???

fieromx3 · Post by **fieromx3** » October 13th, 2007, 11:57 am

Steve_SK · Post by **Steve_SK** » October 13th, 2007, 2:42 pm

I have ECU from KL-DE 1997 (EU) somewhere.. if interested.

Slammed6 · Post by **Slammed6** » October 13th, 2007, 4:17 pm

I've got a authentic KL-36 ECU for sale. Let me know if you are interested.

mx3autozam · Post by **mx3autozam** » October 13th, 2007, 8:35 pm

fieromx3 wrote:screw safc! electromotive TEC3 with coil packs or full aem standalone! way better than what mx3autozam said!

Yes it is better, But if you don't wanna spend as much what I said is good.

the aem unit is like $2000

BornSticky · Post by **BornSticky** » October 14th, 2007, 4:03 am

2000!!!!! geeze!!!!! I think if i went that way i would probably just kill my engine

im looking for more something bolt on i bought a kl36 off ebay for 136 + shipping so its not a big deal i can sell it if i dont like it

thanks for all the replies by the way!!