Intake Adapter

[-=deathtrap-mx3=-]

Where can i buy an adapter for a custom intake, i'm just replacing the airbox with a cone filter. i know corksport sells them, but can i get one for less than $20?

[white fish]

home depot plumbing section 3inch silicone adapter

[-=deathtrap-mx3=-]

sweeeeet! thanks alot!

[David Coleman]

That wont work for a RS, because IIRC it has a flat plate on the MAF that bolts to the box. You can make your own, though I'd just get one from Corksport. And don't put the filter right on the MAF, cause you'll just ingest hot engine air and lose hp [though gain noise, which is confused with HP]. [img]shrug.gif"%20border="0[/img]

[-=deathtrap-mx3=-]

on the subject of hp:<BR> i figured leaving JUST the plastic piece that holds the hood prop would keep enough air coming in under the hood.<P>can i get a bit of piping and have a muffler shop bend as needed, so that it consumes more "cold" air