YOUR 0-60 TIMES??

A forum for Drag Strip/Track Racing Discussions. (NO Street Racing or Kill Stories, they WILL be deleted.)
User avatar
newflow
Regular Member
Posts: 77
Joined: April 22nd, 2004, 2:01 am
Location: bronx, ny
Contact:

YOUR 0-60 TIMES??

Post by newflow »

Guys, bring some of your setups and post in this topic your 0-60m times...
Compact Gladiator

"Do not follow the path, instead; go where there is no path and leave a trail"

WWW.GEOCITIES.COM/NEWFLOW81
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: YOUR 0-60 TIMES??

Post by papa roached »

not fast enough yet :D ;)
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
User avatar
Sam Baker
Regular Member
Posts: 1461
Joined: May 23rd, 2003, 2:01 am
Location: Wellington, New Zealand

Re: YOUR 0-60 TIMES??

Post by Sam Baker »

dude u got a tight webpage! :2thumbsup:

but as for 0-60.. meh i'm slow.. last time i checked it was mid 6's. is that average?
92 Autozam AZ3
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: YOUR 0-60 TIMES??

Post by babyblueMX3 »

<img src="http://memimage.cardomain.net/member_im ... 4_full.jpg" alt=" - " />

if you can figure out what is what in this you'll have your answer..bte if somebody got the answer to that let me know..I know I3 is the 1/8th but not sure about the others
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Ma-Ze
Regular Member
Posts: 53
Joined: July 20th, 2004, 2:01 am
Location: San Antonio, TX

Re: YOUR 0-60 TIMES??

Post by Ma-Ze »

Originally posted by babyblueMX3:
<img src="http://memimage.cardomain.net/member_im ... 4_full.jpg" alt=" - " />

if you can figure out what is what in this you'll have your answer..bte if somebody got the answer to that let me know..I know I3 is the 1/8th but not sure about the others
I1 is your 60ft, 2.175. Sam,i think hes asking for 60ft times since he wants to see slips, not 0-60mph
92 MX-3 RS,
Racing Mazda turbo kit. 451 WHP @ 25 psi
12.1 @ 117 mph w/318whp
http://www.cardomain.com/memberpage/652555
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: YOUR 0-60 TIMES??

Post by babyblueMX3 »

thanks man..how about I2
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
newflow
Regular Member
Posts: 77
Joined: April 22nd, 2004, 2:01 am
Location: bronx, ny
Contact:

Re: YOUR 0-60 TIMES??

Post by newflow »

thanks SAM BAKER. Im still working on that site. And if you can provide any info to enrich my website, be my guess.

Thanks guys
Compact Gladiator

"Do not follow the path, instead; go where there is no path and leave a trail"

WWW.GEOCITIES.COM/NEWFLOW81
xXx_OTEP_xXx
Regular Member
Posts: 583
Joined: September 16th, 2002, 2:01 am
Location: Hartford, CT

Re: YOUR 0-60 TIMES??

Post by xXx_OTEP_xXx »

actually, he didn't say he wanted to see slips. he said setups.

and the 0-60 on my old RS was about 10 seconds. lol.
Sold my 95 RS "Little Peanut" but she will never be forgotten. :(
ZEmadman
Regular Member
Posts: 219
Joined: July 14th, 2004, 2:01 am
Location: Indianapolis, IN

Re: YOUR 0-60 TIMES??

Post by ZEmadman »

maybe I2 is 330ft???
Image
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: YOUR 0-60 TIMES??

Post by babyblueMX3 »

Originally posted by xXx_OTEP_xXx:
actually, he didn't say he wanted to see slips. he said setups.

and the 0-60 on my old RS was about 10 seconds. lol.
I know but if you would have read my post carefully you would have noticed that i posted that above time slip because I didn't knew what the "I" meant and what the 0-60 was.

BTW my set-up is on my first page of cardomain on the bottom..just too lazy to post them, here
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
xXx_OTEP_xXx
Regular Member
Posts: 583
Joined: September 16th, 2002, 2:01 am
Location: Hartford, CT

Re: YOUR 0-60 TIMES??

Post by xXx_OTEP_xXx »

Originally posted by babyblueMX3:
Originally posted by xXx_OTEP_xXx:
actually, he didn't say he wanted to see slips. he said setups.

and the 0-60 on my old RS was about 10 seconds. lol.
I know but if you would have read my post carefully you would have noticed that i posted that above time slip because I didn't knew what the "I" meant and what the 0-60 was.

BTW my set-up is on my first page of cardomain on the bottom..just too lazy to post them, here
What made you think I didn't read your post carefully?

I see the slip you posted and, yes, the first "I" is 60' time. 0-60 is never on a 1/4 mile slip that I've ever seen.
Sold my 95 RS "Little Peanut" but she will never be forgotten. :(
User avatar
jkpgt96
Regular Member
Posts: 70
Joined: July 30th, 2005, 10:06 pm
Location: St. Louis

Post by jkpgt96 »

I dont think that 0-60 times will be that impressive b/c of the FWD traction issue..anyone with power will have trouble hooking at low speeds thus not a good 0-60 but still a fast car...unless you have lots of suspension work and an LSD... :lol:
Laser Red '96 GT-12:1-IBeams-10k RPM-EXT. OIL PUMP-COLT ONE-OFF CAMS-CUSTOM LONGTUBES-SHEETMETAL IM-BUILT HEADS-125 SHOT-PAR 3/4 GEARSETS-MFACTORY LSD-ETC..SHOULD BE A FUN RIDE..:thup:
http://www.cardomain.com/ride/542054
User avatar
OutlaW
Regular Member
Posts: 965
Joined: April 22nd, 2006, 6:59 am
Location: Lisbon, Portugal

Post by OutlaW »

7.6 seconds @ 120 bhp at the engine ...
JWMotorsports
Regular Member
Posts: 629
Joined: November 21st, 2002, 2:01 am
Location: Weyers Cave, VA
Contact:

Post by JWMotorsports »

With my open diff setup & 245/50-R16 tires a Hybussa could only pull 3 cars on me in a 1/6th mile from a dig. This was with the clutch slipping.

We are going to the track this coming Friday with the LSD setup. My 60's with the smaller tires was 2.4sec. as they just went up in smoke if I tried to launch. Since the larger tires have been on I don't have new times yet. If I can pull a sub 2sec. 60' with the boost turned back up to 26psi...we are targeting sub 7sec 1/8th mile at tripple digit trap speeds. The new Griffen aluminum radiator should be a BIG plus as I blew a 3" long crack in the end tank of the stock radiator during the winter...things got a little to hot for it to handle...even with redline water wetter, a 180* thermostat, and the fan on constantly.
http://www.cardomain.com/ride/354836
B6T, APEXi Silvia IC, HKS SSQV, Magnacore KV85 Wires, NGK V-Power, Haltech E6K, Accel 300+ Digital Ign w/ coil, Accel 375+ controller, JWMmotorsports turbo manifold & exhaust, custom Garret GT-R series turbo, MAZDASPEED mounts, SRD Bushings, Pacesetter Short Shift, entire Pro LX drive train w/ custom ACT clutch (I'm the first to succeed this on B6T), Weapon-R, and lots more stuff!
User avatar
XxantwawnxX
Regular Member
Posts: 1281
Joined: January 8th, 2005, 11:08 pm
Location: Newportnews VA

Post by XxantwawnxX »

just under 5 secs for me. for 0-60 mph.
Image

* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
Post Reply

Return to “Drag Strip/Track Racing”