Just thinking of selling my BP stuff, don't really have the time for it.
This came out of my running 92 EGT. Comes with;
87,000k BP.
Injectors were flow tested, came out fine.
150,000k G-series tranny.
No powersteering.
No a/c
Rad/plumbing
Complete wiring harness/ecu/vaf
Pacesetter 4-2-1 header
NEW Stage 1 Competition Clutch
** everything you'll need to swap over, or replace to a 1.8 BP **
What would you guys pay for this?
JACK.
[GI] Complete BP swap/change over
-
- Regular Member
- Posts: 174
- Joined: November 3rd, 2005, 1:31 am
[GI] Complete BP swap/change over
.::Mazda::speeD::.
working on the 2nd part![Wink ;)](./images/smilies/icon_wink.gif)
working on the 2nd part
![Wink ;)](./images/smilies/icon_wink.gif)
- TREVO123
- Regular Member
- Posts: 654
- Joined: November 29th, 2005, 8:57 pm
- Location: BC, CANADA
- Contact:
Id be interested in the header.. But probly for everything about $400us.
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
-
- Regular Member
- Posts: 174
- Joined: November 3rd, 2005, 1:31 am
I'm located in ontario canada. 2 hours north of toronto.
Also i wont be parting this out. I forgot to mention that the engine also has a shaved, port and polished head...in more detail the intake ports were mainly polished and the exhaust ports were ported and polished, the header still hasnt been port matched, but the gasket has been. Also has a port/polished intake manifold with a 5mm bored out throttle body. gasket matched as well. Comes with a 3" short ram intake too.
I'd probably sell the engine for $400us. lol. I'm thinking more like $700 for the entire swap. The motor has 195-200psi in all cylinders, STRONG motor and the clutch alone is worth $315us. http://www.competitionclutches.com its under a 97 miata 1.8BP.
JACK.
Also i wont be parting this out. I forgot to mention that the engine also has a shaved, port and polished head...in more detail the intake ports were mainly polished and the exhaust ports were ported and polished, the header still hasnt been port matched, but the gasket has been. Also has a port/polished intake manifold with a 5mm bored out throttle body. gasket matched as well. Comes with a 3" short ram intake too.
I'd probably sell the engine for $400us. lol. I'm thinking more like $700 for the entire swap. The motor has 195-200psi in all cylinders, STRONG motor and the clutch alone is worth $315us. http://www.competitionclutches.com its under a 97 miata 1.8BP.
JACK.
.::Mazda::speeD::.
working on the 2nd part![Wink ;)](./images/smilies/icon_wink.gif)
working on the 2nd part
![Wink ;)](./images/smilies/icon_wink.gif)
-
- Regular Member
- Posts: 174
- Joined: November 3rd, 2005, 1:31 am
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
a miata clutch works with the g series trans?
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
-
- Regular Member
- Posts: 174
- Joined: November 3rd, 2005, 1:31 am
The 1.8 Miata has a G series transmission...I know lots of people who use XTD Miata clutches in their protege LXs.
Also I will trade this for a KLDE engine/tranny/harness.
This would be pick up only, or i could deliver for a small fee. Located, ontario canada, 2 hours north of toronto.
JACK.
Also I will trade this for a KLDE engine/tranny/harness.
This would be pick up only, or i could deliver for a small fee. Located, ontario canada, 2 hours north of toronto.
JACK.
.::Mazda::speeD::.
working on the 2nd part![Wink ;)](./images/smilies/icon_wink.gif)
working on the 2nd part
![Wink ;)](./images/smilies/icon_wink.gif)