.adr file for tuning (help)

stoker100 · Post by **stoker100** » May 20th, 2006, 5:08 am

just some background info, im an old KLZE owner who mainly chats on probetalk, i need some information and am trying all the possible relative forums for it.

a .adr file is used by software like tuner pro to automatically show the fuel/timing maps etc and makes it easy for changing. Well i recently purchased an emulator and have been manually editing the files with a hex editor and uploading after the change. its not the best way to do it so im wondering if anyone has every created a .adr file for the MX3 or MX6 engine. im aware there are not many tuners out there and its hard being kinda the first to be doing this.

if anyone has a easy list of where all the maps are loacated (by address) or the .adr file that they could send me it would be greatly appreciated. Otherwise ill be laft to manually find them all again and work out how to make an .adr file

stoker100 · Post by **stoker100** » June 5th, 2006, 12:08 am

::bump:: anyone?

kiwi_MX3 · Post by **kiwi_MX3** » June 5th, 2006, 12:41 am

I run standalone ECU which does all this for me, sorry to say
most peaple on here either run stock ecu's or ms.

good luck and hope you have a big coffee pot.

stoker100 · Post by **stoker100** » June 5th, 2006, 11:58 am

looks like ill be making it myself, i already started and i know its not too hard, i know where 90% of the information is and how to modify it but im just lazy i guess, still not as lazy as the MS people tho.

nightnic · Post by **nightnic** » June 5th, 2006, 2:10 pm

Why dont you use the tunerpro then? It shows addresses, can search for possible map locations and has hex editor as well if you prefer

stoker100 · Post by **stoker100** » June 5th, 2006, 8:31 pm

tuner pro needs the same thing (.xdf) so i still have to manually find all the maps and tell the software where they are. ill be doing this soon from the look of it.