vacuum lines, fuel lines, power steering diagrams

V6 Technical/Performance Discussions
Post Reply
Mazda_Powered
Regular Member
Posts: 174
Joined: November 3rd, 2005, 1:31 am

vacuum lines, fuel lines, power steering diagrams

Post by Mazda_Powered »

hey guys, couldnt see to find much besides a vacuum diagram for the intake manifold, i was wondering if anybody had a diagram of some other lay outs? like the other vacuum lines, power steering, possibly electrical.

anything will help, thanks

JACK
.::Mazda::speeD::.

working on the 2nd part ;)
User avatar
jschrauwen
Forum Moderator
Posts: 6052
Joined: September 27th, 2003, 2:01 am
Location: Frankford, Ontario, Canada
Contact:

Post by jschrauwen »

Jack, if the online manual doesn't cover it enough there are a few older posts (last summer I believe) where members have pasted some large elaborate diagrams. Also, I've found that MX6.com has some on their site and possibly Probetalk that may prove effective for the KL engine. It's out there. Also try "Grants" eunos site ( http://www.eunos30x.com ) for some excellent wiring schematics.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
Image
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
Mazda_Powered
Regular Member
Posts: 174
Joined: November 3rd, 2005, 1:31 am

Post by Mazda_Powered »

yea, i tried the eunos30x.com out, the info was helpful, but not quiet what i was looking for, i'll look for this online manual tho :)

thanks

JACK

ps. anyone with diagrams, wanna post em up???
.::Mazda::speeD::.

working on the 2nd part ;)
User avatar
PATDIESEL
Senior Member
Posts: 4476
Joined: August 13th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Atlanta, GA.

Post by PATDIESEL »

What exactly are you looking for. We could help better if we knew what you were looking for without having to host and post a ton of diagrams. :wink:
Image
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
Mazda_Powered
Regular Member
Posts: 174
Joined: November 3rd, 2005, 1:31 am

Post by Mazda_Powered »

haha, good point. but the online shop manual had everything i needed :) that thing is freakin awesome!

thanks tho

JACK
.::Mazda::speeD::.

working on the 2nd part ;)
User avatar
PATDIESEL
Senior Member
Posts: 4476
Joined: August 13th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Atlanta, GA.

Post by PATDIESEL »

Good deal, glad you found what you needed 8)
Image
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
Mazda_Powered
Regular Member
Posts: 174
Joined: November 3rd, 2005, 1:31 am

Post by Mazda_Powered »

me too, haha, thanks

JACK
.::Mazda::speeD::.

working on the 2nd part ;)
Post Reply

Return to “V6 Technical/Performance”