can a turbo from a diesel car be used on our cars?

A Forum For All Forced Induction Systems Topics Such As Turbos, Superchargers and Nitrous Oxide.
Post Reply
rudeboymx6
Junior Member
Posts: 17
Joined: December 4th, 2005, 8:03 pm

can a turbo from a diesel car be used on our cars?

Post by rudeboymx6 »

just wondering if i was able to use turbo's from diesel cars/trucks??
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

yup
I think that is what Rebel2k is using, a holset turbo
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
nos92mx3
Supporting Member
Posts: 1303
Joined: November 21st, 2003, 2:01 am
Location: Farmington,NY

Post by nos92mx3 »

Holset hx 30 FTW
92' Rs-t b6t/De - RIP

93' Rs-t BPT - Sold

03' WRB wrx Wagon - Current
User avatar
mx3stylez
Regular Member
Posts: 114
Joined: October 31st, 2005, 4:56 pm
Location: edmonton, alberta

Post by mx3stylez »

i'm pretty sure turbos were invented for deisels , and then made to work on other applications
klze swap, wisco 8.5 comp pistons, pauter rods, act stage 3 clutch, lightened flywheel, UR racing pulley, flex-o-lite oil cooler, 2.5" custom exhaust with high flow cat, B&M short throw shifter, S&R cross drilled rotors, , B&G lowering springs, maxxim 17" gun metal rims, modded nissan injectors, walbro 255 lph fuel pump, areomotive afpr, msd 6a , magasquirt v3, and turboed
User avatar
Vanished
Regular Member
Posts: 1826
Joined: July 4th, 2004, 2:01 am
Location: Saskatoon Canada

Post by Vanished »

can i use the spark plugs too?
1992 Blaze MX-3 GS *R.I.P.*

1993 Blue 93 SE-ZE

http://www.cardomain.com/ride/2770987/2
User avatar
ariesdude
Regular Member
Posts: 1244
Joined: August 4th, 2005, 2:43 pm
Contact:

Post by ariesdude »

Diesel engines dont have spark plugs ....
94 Mx-3 Precidia
1.8L 4Cyl DOHC newGen BP (used to be B6DE) ATX
http://www.mx-3.com/phpbb2/viewtopic.php?t=54032
http://www.cardomain.com/id/ariesdude
SloGsr
Regular Member
Posts: 51
Joined: December 16th, 2005, 6:21 pm
Location: Bend OR U.S.A.

Post by SloGsr »

I don't think certain applications would be a good idea like a ford power stroke turbo is made for a 7.3 liter engine that red lines at 4 grand and they are running a compression ratio somewhere in the 22:1 area. The propeller on the exhaust side is designed to utilize the air flow output from that specific motor so it might be best to find one off of something like a turbo diesel Isuzu or Mitsubishi pick up.

Also, on another note...I work at Columbia Aircraft Manufacturing where we build the fastest certified piston aircraft. We do so by employing a twin turbo 512 C.I.D horizontally opposed six cylinder. A buddy of mine had the good fortune of getting a hold of one of these turbos for free (it was slightly damaged in shipping that was easily fixable). any how he fabed up a manifold and bolted it to his Honda H22 powered kit car and it was incredible....all the way to 1700 rpm. Then it fell flat on its face and made no more power. after shifting it would spool then flatten out again.
Long story but I would hate to see you invest a good chunk of money only to have it go to waste. Good luck if you decide to go with it.
93_mx3_gs
Regular Member
Posts: 382
Joined: November 5th, 2005, 2:39 pm
Location: Salt Lake City, UT
Contact:

Post by 93_mx3_gs »

Vanished wrote:can i use the spark plugs too?
They use what is called a glow plug.
User avatar
ariesdude
Regular Member
Posts: 1244
Joined: August 4th, 2005, 2:43 pm
Contact:

Post by ariesdude »

93_mx3_gs wrote:
Vanished wrote:can i use the spark plugs too?
They use what is called a glow plug.
http://auto.howstuffworks.com/diesel1.htm

The page above has good explanation for diesel engines - In short they do not use any kind of ignition source - the high compression inside the cylinder makes the diesel fuel ignite spontaneously.

If the outside air is too cold then in older engines even high compression may not produce combustion - in that cause a heating element is used to heat up the air in the cylinder. That heating element is called a glow plug. Its a pre-computer era technology. They are not used anymore i think.
94 Mx-3 Precidia
1.8L 4Cyl DOHC newGen BP (used to be B6DE) ATX
http://www.mx-3.com/phpbb2/viewtopic.php?t=54032
http://www.cardomain.com/id/ariesdude
Post Reply

Return to “Forced Induction”