Tranny/Clutch question

4-Cyl. Technical/Performance Discussions
Post Reply
rdawg000
Regular Member
Posts: 97
Joined: June 11th, 2004, 2:01 am
Location: K-Town
Contact:

Tranny/Clutch question

Post by rdawg000 »

What tranny can be used on the BP-T engine...does that stock 1.6L tranny work.... also guys with this swap what clutch would u recommend??

Thanks

Ryan
User avatar
dj inferno
Regular Member
Posts: 318
Joined: November 9th, 2003, 2:01 am
Location: MN
Contact:

Post by dj inferno »

ummm searching will help but from what i have gathered you can either use one from a protege LX, or escort or w/e but then you must change axels, or you can use the one for the 1.6 sohc. but you should use the flywheel/clutch/tranny all from the same thing w/e it happens to be. i would sugest one from a protege LX, then the clutch that corksport offers. but thats a lil spendy if you ask me. if your on a budget then just stick with your stuff from the 1.6 sohc. but the protege has better gear ratios and stuff... ne ways your pic... oh and if ne one reads this and its wrong... correct me b4 i go buying the stuff for my car. thx
dan
Post Reply

Return to “4-Cyl. Technical/Performance”