MX-3 EXHAUST
MX-3 EXHAUST
How much different is the Probe GT exhaust then an MX-3s? Ive looked at the mx-3s , and its just a matter of straight back 90deg. bend right straight over the rear control arm and down on to the hangers. Any help on this would be helpful. Reason Im asking is to see I could use the Greddy exhaust for probes on my car with little or no mods.
-
- Regular Member
- Posts: 452
- Joined: May 15th, 2003, 2:01 am
- Location: CLEMSON, SC
- Contact:
I'm lost. You've found out for youself the lay-out of the MX-3 exhaust piping and now you're asking for the Probe's? I'd imagine ProbeTalk.com would be able to better answer...? ![Confused :?](./images/smilies/icon_confused.gif)
![Confused :?](./images/smilies/icon_confused.gif)
MX-3 Owners Club of Atlanta
Clemson Sports Car Club #72
MOCA tuned straight-neck KL-ZE '93 MX-3 GS : Updated: 03/05/06
Clemson Sports Car Club #72
MOCA tuned straight-neck KL-ZE '93 MX-3 GS : Updated: 03/05/06
-
- Regular Member
- Posts: 528
- Joined: January 23rd, 2004, 2:01 am
- Location: East Grand Forks, MN
I was thinking about doing that a while ago too. But the exhaust between the two is too different. Its just piping so if you can weld anything is possible but it would kind ruin the point of having a cat-back then. Cause you would have to cut the SS mandrel bends.
THIS USER HAS BEEN BANNED, DO NOT DEAL WITH HIM. - MX-3.com Admin