march 1/8th mile times.....
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: march 1/8th mile times.....
you guys are all b*stards I still have 2.5 feet of snow on my lawn but I can still practice my 60ft times in the dry patches when the sun comes out. nitrous on monday !!!
13.023 @ 105 mph
Re: march 1/8th mile times.....
Heh.. didnt get to race today cause the clutch is slippin a bit too much.. A slipping clutch didnt agree with the nittos..
-torp.
I don't own a Mazda.
I don't own a Mazda.
-
- Regular Member
- Posts: 500
- Joined: April 16th, 2001, 2:01 am
- Location: Lewisville, texas
- Contact:
Re: march 1/8th mile times.....
yeah for some reason my motor doesnt like driving with a blown turbo....so no new times for me until i get that fixed. i know how you feel torpedan. oh well well get our **** together one day and go hit the track together again. even though it really wasnt fair it was still fun. next time it will def be more fun.
jeremy cline
95 MX-3 RS
The only BPT GTR MX-3 in Texas!!!
man iraq sucks!!!
95 MX-3 RS
The only BPT GTR MX-3 in Texas!!!
man iraq sucks!!!
Re: march 1/8th mile times.....
Now i will race ya!!!!<p>Yeah sucks.. but i think your turbo will be a bit more costly than my clutch.. then again if you add the new flywheel and the clutch up that would equal the cost of the turbo..<p>either way once all is said and done i should have a good platform to bolt a turbo on and lay down some low times.. then find a new transmission to replace the peices i will have left
-torp.
I don't own a Mazda.
I don't own a Mazda.
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: march 1/8th mile times.....
new time 8.718 @ ? maybe 86 ? they didn't give me a mph
13.023 @ 105 mph
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: march 1/8th mile times.....
any of you guys ahve your 0-60 times?
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: march 1/8th mile times.....
60mph
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
Re: march 1/8th mile times.....
dunno will have to dig out the ol g-tech assuming it will work for a crap
-torp.
I don't own a Mazda.
I don't own a Mazda.
-
- Regular Member
- Posts: 629
- Joined: November 21st, 2002, 2:01 am
- Location: Weyers Cave, VA
- Contact:
Re: march 1/8th mile times.....
Would have had a high 8-9.00sec 1/8 mile pass today but the car wouldn't go into 2nd gear, so I had to slow down from 40mph down to 30mph to get it back in first cuz it just wouldn't hit second. I spun all the way through first and second, chirping 3rd for a :<p>13.3?? @ 73.?mph <p>I was PISSED OFF!!!!!<p>I still almost caught the chump in the 5.0 Mustang...he had a .9 sec head start! I pulled on him hard as NUTS!!! I would have went again but they wanted me to pay a $10 buy back fee...so I told em to go take a fly leap & left that sorry @$$ track!!! They are a rip off!!!! I'll be going to Natural Bridge from now on...Eastside SUCKS, it's like a circus!!! Hopefully my turbo won't blow till I get a better time. It's droping boost on the top end of the RPM band from 16psi-10psi around 4-5K to red line (6350RPM).
http://www.cardomain.com/ride/354836
B6T, APEXi Silvia IC, HKS SSQV, Magnacore KV85 Wires, NGK V-Power, Haltech E6K, Accel 300+ Digital Ign w/ coil, Accel 375+ controller, JWMmotorsports turbo manifold & exhaust, custom Garret GT-R series turbo, MAZDASPEED mounts, SRD Bushings, Pacesetter Short Shift, entire Pro LX drive train w/ custom ACT clutch (I'm the first to succeed this on B6T), Weapon-R, and lots more stuff!
B6T, APEXi Silvia IC, HKS SSQV, Magnacore KV85 Wires, NGK V-Power, Haltech E6K, Accel 300+ Digital Ign w/ coil, Accel 375+ controller, JWMmotorsports turbo manifold & exhaust, custom Garret GT-R series turbo, MAZDASPEED mounts, SRD Bushings, Pacesetter Short Shift, entire Pro LX drive train w/ custom ACT clutch (I'm the first to succeed this on B6T), Weapon-R, and lots more stuff!
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: march 1/8th mile times.....
Your turbo won't blow it just isn't efficienct past 14psi. Anything above that level and you need a new turbo. The vj-11 would help keep boost levels constant for you but it isn't really much of an upgrade.
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
-
- Regular Member
- Posts: 629
- Joined: November 21st, 2002, 2:01 am
- Location: Weyers Cave, VA
- Contact:
Re: march 1/8th mile times.....
I'm in the process of upgrading to my 400HP turbo as we speak.
http://www.cardomain.com/ride/354836
B6T, APEXi Silvia IC, HKS SSQV, Magnacore KV85 Wires, NGK V-Power, Haltech E6K, Accel 300+ Digital Ign w/ coil, Accel 375+ controller, JWMmotorsports turbo manifold & exhaust, custom Garret GT-R series turbo, MAZDASPEED mounts, SRD Bushings, Pacesetter Short Shift, entire Pro LX drive train w/ custom ACT clutch (I'm the first to succeed this on B6T), Weapon-R, and lots more stuff!
B6T, APEXi Silvia IC, HKS SSQV, Magnacore KV85 Wires, NGK V-Power, Haltech E6K, Accel 300+ Digital Ign w/ coil, Accel 375+ controller, JWMmotorsports turbo manifold & exhaust, custom Garret GT-R series turbo, MAZDASPEED mounts, SRD Bushings, Pacesetter Short Shift, entire Pro LX drive train w/ custom ACT clutch (I'm the first to succeed this on B6T), Weapon-R, and lots more stuff!
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: march 1/8th mile times.....
the buy back fee is more like a rental charge for being on the 1/8 mile for 13 seconds no seriously get some times for the 4 banger boys
13.023 @ 105 mph
Re: march 1/8th mile times.....
haha i would like to atleast put a mark onto the top 1/4 but i cant get to one that is close to here .. well there arnt any close to here..
-torp.
I don't own a Mazda.
I don't own a Mazda.