sway bars
-
ProtegeSTS
- Regular Member
- Posts: 1821
- Joined: December 5th, 2001, 2:01 am
- Location: Gainesville
Re: sway bars
Just to save everyone the trouble, whitline's website is here
Re: sway bars
i checked the cite and mx-3 was not listed, does anyone have sway bars? Where did you get them from and was it worth it?
Re: sway bars
You didn't see it because it Australia the MX-3 is known as the Eunos 30x. Look under the Mazda section and you'll find it.<p>That being said I am very confuse by the post about whiteline added to the FAQ's and found still in this forum. It may be too late at night, but it sound like it's contradictory to me. I have to read again, and spend some more time on whitelines website. It sounds like they are saying the sway bars don't fit, but maybe they are talking about the sway bar from the kit for the 323 and not the one they sell for the 30x. I think the other stuff fromt the 323 kit fits the MX-3 but not sure on that. As I said, look at the other post and also at whitlines website.
-
ProtegeSTS
- Regular Member
- Posts: 1821
- Joined: December 5th, 2001, 2:01 am
- Location: Gainesville
Re: sway bars
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by FMSMX3:
You didn't see it because it Australia the MX-3 is known as the Eunos 30x. Look under the Mazda section and you'll find it.<p>That being said I am very confuse by the post about whiteline added to the FAQ's and found still in this forum. It may be too late at night, but it sound like it's contradictory to me. I have to read again, and spend some more time on whitelines website. It sounds like they are saying the sway bars don't fit, but maybe they are talking about the sway bar from the kit for the 323 and not the one they sell for the 30x. I think the other stuff fromt the 323 kit fits the MX-3 but not sure on that. As I said, look at the other post and also at whitlines website.<hr></blockquote><p>Ok, to clarify.<p>Sway bars, endlinks, anything associated with sway bars are DIFFERENT between the 323/Protege and the MX-3.<p>So whiteline DOES make stuff for the Eunos 30x/MX-3, but this is not the same thing that GroHarlem was talking about in his post.
You didn't see it because it Australia the MX-3 is known as the Eunos 30x. Look under the Mazda section and you'll find it.<p>That being said I am very confuse by the post about whiteline added to the FAQ's and found still in this forum. It may be too late at night, but it sound like it's contradictory to me. I have to read again, and spend some more time on whitelines website. It sounds like they are saying the sway bars don't fit, but maybe they are talking about the sway bar from the kit for the 323 and not the one they sell for the 30x. I think the other stuff fromt the 323 kit fits the MX-3 but not sure on that. As I said, look at the other post and also at whitlines website.<hr></blockquote><p>Ok, to clarify.<p>Sway bars, endlinks, anything associated with sway bars are DIFFERENT between the 323/Protege and the MX-3.<p>So whiteline DOES make stuff for the Eunos 30x/MX-3, but this is not the same thing that GroHarlem was talking about in his post.
-93 MR2
#129 E-stock
#129 E-stock
Re: sway bars
I see them on ebay for like 15 and 17 dollars all the time...is there a difference between these sway bars and the ones corksport sells?
-
ProtegeSTS
- Regular Member
- Posts: 1821
- Joined: December 5th, 2001, 2:01 am
- Location: Gainesville
Re: sway bars
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by JonGordo8:
I see them on ebay for like 15 and 17 dollars all the time...is there a difference between these sway bars and the ones corksport sells?<hr></blockquote><p>You're speaking of STRUT bars, not sway bars.
I see them on ebay for like 15 and 17 dollars all the time...is there a difference between these sway bars and the ones corksport sells?<hr></blockquote><p>You're speaking of STRUT bars, not sway bars.
-93 MR2
#129 E-stock
#129 E-stock
- monty73741
- Forum Moderator
- Posts: 2651
- Joined: February 11th, 2001, 2:01 am
- Location: baltimore,md usa
- Contact:
Re: sway bars
i have the corksport strut bars <p>& i have seen the toucan industries one...if you grab the touch industries one you can move it back & forth with some force...the corksport ones you really cant
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
-
ProtegeSTS
- Regular Member
- Posts: 1821
- Joined: December 5th, 2001, 2:01 am
- Location: Gainesville
Re: sway bars
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by monty73741:
i have the corksport strut bars <p>& i have seen the toucan industries one...if you grab the touch industries one you can move it back & forth with some force...the corksport ones you really cant<hr></blockquote><p>This post is NOT about strut bars. If you want to talk about them, start another thread.
i have the corksport strut bars <p>& i have seen the toucan industries one...if you grab the touch industries one you can move it back & forth with some force...the corksport ones you really cant<hr></blockquote><p>This post is NOT about strut bars. If you want to talk about them, start another thread.
-93 MR2
#129 E-stock
#129 E-stock