Removing the mazda logo on the hood ?

[jokke]

Is it screwed on, or just glued ?

Thanks

[fry_81]

glued on, it has 2 plastic rods sticking out of the emblym that go into the hood, it will probably come off by sawing it off with dental floss.

[storm99]

I was thinking about removing the emblem off my hood and replacing it with the 'new' Mazda badge from the MX-5 (03/04 model year).
Jokke - I'd be interested to hear how hard it is to remove, and how much of a mess it makes.

[psneddon]

I replaced my badge with the MX-5 one you mention. I looks great. I just basically prized off the old badge then had to use some cleaner and rubbing to get the leftover glue off. I then had to break the pins of the MX-5 badge as they were i a different place and didnt line up. However it fits over the old holes perfectly.

Paul

[jokke]

So if i want 0 logo at all. I would have two holes in my hood ?

[Tempus]

untill you filled and painted them, yep..

So if planning to de-badge the car, it's recommended to do it before painting, so you're not driving around with a bunch of holes where badges used to be.

[storm99]

Paul - Thanks for the heads-up, now I know, I'll be doing this next week, cheers!

[mx3man83]

I pulled my emblem off before I got my car painted. To cover the two holes, I put two tiny pieces of fiberglass behind them, let it harden, then just bondo'd over the top.

[mitmaks]

Id keep my old one, i take pride in my mx3 and whatever badges on it but ive got c/f hood hmm that just gave me an idea, ill prob stick it on carbon fiber hood

[MX3-Freak]

The hatch emblem on the P5 fits the hood of our cars the best just for a heads up.

[storm99]

Replaced the emblem last night. I used the one from a 2004 MX-5 (miata).
I had to remove the pins from the back, and I trimmed a sticky fixer to fit the back of the M part of the badge, so that it completely covered the holes left by the old badge.
I used acetone - my girlfriend's nail polish remover (shhh, don't tell her!) to clean off the mess left by the old emblem to give me a nice clean surface to stick to. The 2 emblems are almost exactly the same size, so it looks really good!

[OutlaW]

Can anyone please help this poor portuguese fool ?

I want to make a de-badge on the Mx-3... and to switch the Mazda Badge on the hood.
Does anyone know if the trunk badges, the Mazda , the Mx-3 and the V6 badge leave holes ? Or just glue ?
I really need a hand here

[mr1in6billion]

just glue

[OutlaW]

just glue

thanks