Need a list of trannies will work with both the K8 and K

V6 Technical/Performance Discussions
Post Reply
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

Need a list of trannies will work with both the K8 and K

Post by Juans_93_MX3 »

So far I know the stock K8 Manual transmission will work with both engines. How about others?
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
RoundTop
Regular Member
Posts: 449
Joined: August 12th, 2003, 2:01 am
Location: Vancouver, BC

Re: Need a list of trannies will work with both the K8 and K

Post by RoundTop »

Well...the tranny from the KLDE/ZE (MX-6), or from the milennia S (FE) AFAIR.

Pretty much K series trannys are interchangeable.

But only diff between the MX-3 and 6 trannies is that the MX-6's one has a slightly lower ratio for 5th gear (so lower RPMs are on the highway...slightly)
User avatar
monstar-mx-3
Regular Member
Posts: 1112
Joined: February 28th, 2002, 2:01 am
Location: vancouver

Re: Need a list of trannies will work with both the K8 and K

Post by monstar-mx-3 »

I'm running a DE tranny on my stocker 1.8. No problems runS great!
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: Need a list of trannies will work with both the K8 and K

Post by papa roached »

Originally posted by RoundTop:
Well...the tranny from the KLDE/ZE (MX-6), or from the milennia S (FE) AFAIR.

Pretty much K series trannys are interchangeable.

But only diff between the MX-3 and 6 trannies is that the MX-6's one has a slightly lower ratio for 5th gear (so lower RPMs are on the highway...slightly)
its a different final drive not 5th, all the gears will be spaced out a bit more and i hear that its only in the 626, not hte MX-6 or Probe
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Gro Harlem
Senior Member
Posts: 3391
Joined: November 30th, 2001, 2:01 am
Location: Stuttgart, Deutschland
Contact:

Re: Need a list of trannies will work with both the K8 and K

Post by Gro Harlem »

don't go by engine, go by the tranny series.

K-series all used g-series tranny's...so any car with a 5spd tranny w/a K-series engine will work.

the lsd one fits and works, but you have to source the axles too, or make custom ones
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
TsiMiata
Regular Member
Posts: 1074
Joined: July 30th, 2003, 2:01 am
Location: Cape Cod, MA
Contact:

Re: Need a list of trannies will work with both the K8 and K

Post by TsiMiata »

Here are the cars that came with manual trannies that will fit the KLZE, KLDE, KFZE, K8 & KJ engines

1993-1997 Ford Probe 2.5 V-6
1993-2002 Mazda 626 V-6
1995-1999 Mazda Millenia 2.5 V-6, The "S" 2.3 liter model only came with an auto
1993-1997 Mazda MX-6 2.5 V-6

Not sure wha they came in but the 2.0 KFZE tranny will work also.
93 MX-3 GS- ZE, KL31 ECU, Fidanza Flywheel, CM Stage 2-R clutch, Hotshot Headers

99 Subaru Impreza RS, the new toy

91 Eagle Talon Tsi AWD *RIP*
User avatar
bmwm3guy
Regular Member
Posts: 1066
Joined: March 7th, 2004, 2:01 am
Location: Gatineau, QC
Contact:

Re: Need a list of trannies will work with both the K8 and K

Post by bmwm3guy »

Originally posted by papa roached:
its a different final drive not 5th, all the gears will be spaced out a bit more and i hear that its only in the 626, not hte MX-6 or Probe
The MX6 and 626 use the same tranny with the lower final drive ratio
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

Re: Need a list of trannies will work with both the K8 and K

Post by Juans_93_MX3 »

Originally posted by TsiMiata:
Here are the cars that came with manual trannies that will fit the KLZE, KLDE, KFZE, K8 & KJ engines

1993-1997 Ford Probe 2.5 V-6
1993-2002 Mazda 626 V-6
1995-1999 Mazda Millenia 2.5 V-6, The "S" 2.3 liter model only came with an auto
1993-1997 Mazda MX-6 2.5 V-6

Not sure wha they came in but the 2.0 KFZE tranny will work also.
Wait a minute... Someone told me the Ford Probe 2.5L tranny dosent work with a K8...
Is that true?
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
User avatar
mxmaz
Regular Member
Posts: 1116
Joined: May 4th, 2004, 2:01 am
Location: Canada

Re: Need a list of trannies will work with both the K8 and K

Post by mxmaz »

no that is not true, the 2.5 probe manuel tranny will work

<small>[ November 10, 2004, 10:47 PM: Message edited by: mxmaz ]</small>
Gro Harlem
Senior Member
Posts: 3391
Joined: November 30th, 2001, 2:01 am
Location: Stuttgart, Deutschland
Contact:

Re: Need a list of trannies will work with both the K8 and K

Post by Gro Harlem »

the probe tranny is actually completely identical to the mx3 tranny. the 626/mx6 ones have taller ratios
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
Sean Mandell
Regular Member
Posts: 736
Joined: February 8th, 2002, 2:01 am
Location: Toronto

Re: Need a list of trannies will work with both the K8 and K

Post by Sean Mandell »

i heard that the guts from the 99 escorts will work with the g series tranny and are more reliable for higher hp k series motors..... :shrug:
"A hero and a coward both feel fear but it is the hero who reacts first while the coward hides behind the hero"
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

Re: Need a list of trannies will work with both the K8 and K

Post by Juans_93_MX3 »

Originally posted by nvrsrndr:
i heard that the guts from the 99 escorts will work with the g series tranny and are more reliable for higher hp k series motors..... :shrug:
Is a 99 Escort tranny AWD?
Anyone get a comfirmation on the tranny working on the K series?
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
Post Reply

Return to “V6 Technical/Performance”