Pasesetter Short Shifter...

[Tyler17rose]

I ordered it today and am about to order some bronzoil shifter bushings, just to be sure before i do i want to ask if they fit? I read when searchin that someone couldnt get the bronzoil bushings to fit in with his pasesetter shifter. <p>Thanks for any help.

[monstar-mx-3]

where did you order it from and how much? I havent heard good things about it.

[Tyler17rose]

I got it from Goldwing Auto for 100 cnd. Does anyone have any info on fitting bronzoil bushings with the Pasesetter shifter?

[monstar-mx-3]

short shifter<p>This is for a proage but its a same. This is what i got

[JasonH]

SRD bronzoil shifter bushings come in a set of four; two for the shifter and two for the other end of the transmission linkage (at the transmission.)<p>They do not fit the Pacesetter shifter. You can, however, use the bushings that go on the transmission side of the linkage.<p>The Pacesetter does come with new bushings. They are a harder material than stock.

[Tyler17rose]

Thanks! Its a good think i havnt ordered them yet then... maybe i'll still get them for the other 2 useable bushings though...

[RayRay]

The bushings that come with the pacesetter are CRAP. You'll end up with a shifter that has lots of left/right play. Its irritating and I haven't found a way to fix it. Otherwise the pacesetter is a good shifter.

[mx3TT]

I got the paesetter shifter and havent had one problem with it since the day I got it. Doesnt move side to side or anything.

[Tyler17rose]

That makes me feel alittle better , for a minute there i thought i had made a mistake.

[monstar-mx-3]

i have heard mixed review with pacesetter. Some things they make great items...other are crap...just the luck of the draw. I bought a few things with thier name..and no problem. I in intested in the TMW short shifter. it 45% shortager.

[Custommx3]

I have it as well as my friend Paul. We both seem to like it. My friend mark who has the B&M is going to get the pacesetter because its has a more adjustable throw than the B&M which cannot be adjusted.

[Tyler17rose]

How low did u set yours barry? I think i'm gona set it at the lowest... Oh and is install a sinch?

[Custommx3]

I set mine almost as low as it goes.. seems to shift smoother that way. (as opposed to all the way down.)

[Tyler17rose]

Thats what i'll do then... also are the bushings that come with it good? Or should i try to find something else?

[mx3TT]

Installation couldnt have been any easier. You can put it as low as you want but I put mine like 3/4 of the lowest and its damn short.