solonoid on klze

V6 Technical/Performance Discussions
Post Reply
korban
Regular Member
Posts: 132
Joined: September 12th, 2001, 2:01 am
Location: guelph, ontario, canada
Contact:

solonoid on klze

Post by korban »

The solonoid on the firewall has two hoses comming out of it , one goes to the charcoal canister , but where does the other go?

Thanks..
korban
Regular Member
Posts: 132
Joined: September 12th, 2001, 2:01 am
Location: guelph, ontario, canada
Contact:

Re: solonoid on klze

Post by korban »

anyone???, this ze swap is evil, whenever i start the car it just reves its self to red line pritty quikley????
IanL
Supporting Member
Posts: 1394
Joined: June 13th, 2002, 2:01 am
Location: UK

Re: solonoid on klze

Post by IanL »

Its dark outside, so I'm not looking at the car, but the manual shows it goes to the inlet manifold. It's the Purge Control Solenoid Valve. Basically, the engine sucks vapour from the charcoal canister when the ECU opens the valve. If you didn't have that inlet to the manifold connected up, you would have a large vacuum leak. But that wouldn't make the engine race; the opposite, I think.
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system :)
korban
Regular Member
Posts: 132
Joined: September 12th, 2001, 2:01 am
Location: guelph, ontario, canada
Contact:

Re: solonoid on klze

Post by korban »

Thanks Ian , klze fully installed and running beasty now. Trying to source an ecu now .

Love the car.. hate the limited engine space.
Post Reply

Return to “V6 Technical/Performance”