
KL-ZE GROUP BUY
KL-ZE GROUP BUY
For the record, I am not making a red cent off of this G.B<P>I simply want a ZE and not a 03<P>I spoke with Issam at Engine land in Montreal.<P>They have 8 in stock and basically have given me this price<P>$1,400 Canadian + shipping<P>I need 3 people for this. If we get more, I'm sure we can lower this price. <P>Also if there is anyone in the Toronto area interested, we can drive out there one weekend and personally pick them up for peanuts, still 3 peopls needed, I figure, we show up with cash and how can he say no?<P><BR>For now thats how it stands, once we have more people, i'll try and bargain with him!<P>My email address is <BR>oscardevesa@sympatico.ca if you are interested<P><BR>Since it seems that I have been blocked from this Forum, im gonna have to continue my dialogue by updating this existing message!<BR>
<P><BR>I spoke with Issam this afternoon at Engine Land and this is what he will offer.<P>BPT : $1,800 CAN (tranny inc.) + shipping<BR>KL_ZE: $1,350 CAN + shipping.<P>These prices includ tax.<P>So far there is myself and one oter person interested in the BPT, we need only one more person!!<P><BR>Once again any more needed, please contact Issam at Engine Land. 1-877-966-0888<P>Thanks<p>[ November 06, 2002: Message edited by: EZ_4_FUN ]

OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
Re: KL-ZE GROUP BUY
Heres an Update!!<P>NOV 15, 2002. @ 6:30pm<P>I have recieved a couple of requests for the KL_ZE and BPT<P>So far there are 3 people interested, thats all we really need to finish this buy, but I will hold off a little longer until school is over to settle this, I have alot of stuff happening right now, and this woulod put me over the edge <P>Here are the total cost including shipping and duties where applicable.<P>KL_ZE $1,350 Can(approx 900 U.S)<BR>+ $200 Can for shipping within Canada.<BR>Total: $1,550 Canadian<P>BPT $1,800 Can (approx $1,200 U.S)<BR>+ $200 Can for shipping within Canada<BR>Total: $2000 Canadian<P>Shipping to the states:<BR>please add $150 Canadian for customs, and $300 U.S for shiping.<P>Total shipped to states:<P>KL_ZE $1,980 Canadian<BR>BPT $2,430 Canadian<P>These prices include taxes, shipping and a three month warranty on block and heads<P>The engine come complete with a/c compressor, alternator, power steering pump and distributor <P>Sorry I forgot!<P>the number to Engine Land is: <P>1-877-966-0888.<BR>Just in case you want to verify with them!<P>Thanks<p>[ November 15, 2002: Message edited by: EZ_4_FUN ]
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
Re: KL-ZE GROUP BUY
I have recieved a couple of requests for the KL_ZE and BPT<P>So far there are 3 people interested, thats all we really need to finish this buy, but I will hold off a little longer until school is over to settle this, I have alot of stuff happening right now, and this would put me over the edge <P>Here are the total cost including shipping and duties where applicable.<P>KL_ZE $1,350 Can(approx 900 U.S)<BR>+ $200 Can for shipping within Canada.<BR>Total: $1,550 Canadian<P>BPT $1,800 Can (approx $1,200 U.S)<BR>+ $200 Can for shipping within Canada<BR>Total: $2000 Canadian<P>Shipping to the states:<BR>please add $150 Canadian for customs, and $300 U.S for shiping.<P>Total shipped to states:<P>KL_ZE $1,980 Canadian<BR>BPT $2,430 Canadian<P>These prices include taxes, shipping and a three month warranty on block and heads<P>The engine come complete with a/c compressor, alternator, power steering pump and distributor
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
Re: KL-ZE GROUP BUY
OK Guys!!!<P>Here's some good news! <P>After breaking Issam's balls for a good 20 minutes, I got him to budge quite a bit
<P>So here are the new prices:<P>KL_ZE $1,285 Canadian (approx $875 U.S)<P>BPT $1,800 Canadian (no change)<P>We need 7 buyers and currently their are 4!!!<P>Now to save us even more, he has suggested that I collect the postal/zip code of each customer interested to accurately quote us on the shipping.<P>The warranty is the same and all components previously mentioned are still included. <P> If you are interested, please forward you postal/zip code to me at:<P>EZ_4_FUN@hotmail.com <P>I will relay the info to Issam and get back to you a.s.a.p.<P>The deadline is the second week of January!<P>Thanks

OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
Re: KL-ZE GROUP BUY
UPDATE!!!<p>
Here are the shipping prices for the forementioned. These prices do not include the $100 U.S customs fee, so please add that amount to the shipping + $1,285 CAN for the engine
( approx $875 U.S)
So here goes<p>Brian 08035 $210 U.S + $100 U.S
Kaiser 98444 $360 U.S + $100 U.S
Mike 85719 $350 U.S + $100 U.S
Drew 19947 $200 U.S + $100 U.S
Wampus OHIO $250 U.S + $100 U.S
Chris S6J 1C2 $290 CAN
Brian 55068 $310 U.S + $100 U.S
Ray 25401 $250 U.S + $100 U.S
Danny 20659 $200 U.S + $100 U.S
Steve 91766 to be determined
Jason R1A 3C8 to be determined<p>
So for now that is all I know! If this is apealing to you, please email me at oscardevesa@sympatico.ca to confirm your interest and commitment so we can go to the next step.<p>Thank You<p>
__________________<p>you mxr's might be wondering where did all these people come from. They are from Probetalk.com
http://www.probetalk.com/forums/showthread.php?s=&threadid=1701009602<p>If someone is interested in a shipping price, send me your postal/zipcode and I'll get back to you.
Here are the shipping prices for the forementioned. These prices do not include the $100 U.S customs fee, so please add that amount to the shipping + $1,285 CAN for the engine
( approx $875 U.S)
So here goes<p>Brian 08035 $210 U.S + $100 U.S
Kaiser 98444 $360 U.S + $100 U.S
Mike 85719 $350 U.S + $100 U.S
Drew 19947 $200 U.S + $100 U.S
Wampus OHIO $250 U.S + $100 U.S
Chris S6J 1C2 $290 CAN
Brian 55068 $310 U.S + $100 U.S
Ray 25401 $250 U.S + $100 U.S
Danny 20659 $200 U.S + $100 U.S
Steve 91766 to be determined
Jason R1A 3C8 to be determined<p>
So for now that is all I know! If this is apealing to you, please email me at oscardevesa@sympatico.ca to confirm your interest and commitment so we can go to the next step.<p>Thank You<p>
__________________<p>you mxr's might be wondering where did all these people come from. They are from Probetalk.com
http://www.probetalk.com/forums/showthread.php?s=&threadid=1701009602<p>If someone is interested in a shipping price, send me your postal/zipcode and I'll get back to you.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com