MX-3.com

phredren wrote:Did anyone get a shot of the tennis ball exhaust silencer?

I did

I have a few others too, if anyone wants to post them.

Spinkx79 > Eric > Red 96 GS > Cracked up front end > 905 718 7945.

Lots of goodies soon 2 come

Brembos are cross drilled and slotted arent they?

Should you not expect more brake dust from accelerated pad wear?

KVR pads, what are they organic / semi-metalic?

Gro Harlem wrote:Tehn you gotta cut the f0ckers off with a hacksaw.

I cut one off with a hacksaw got a 1/4 of the way throught the other and my neigbour came over with an angle grinder, took the nut off in about 6 seconds. Then one tap with the hammer and it poped out.

You can put practically any sun/moon roof you want. Mazda does not put them in, they send them away to have it installed by someone else. I know cause when i bought mine i had 2 options (theres another recent post about this) $1000 for sunroof or air. I chose air. I have been dooin a little looking ...

D323 wrote:our friends over at miata.net have done most of the leg work for us....

their garage section has many handly tools such as this one:

http://www.miata.net/garage/tirecalc.html

That is a cool little tool.

Didn't know i was going 2k slower than the gauge. I thought i was a bit faster.

Scratch the Starbucks idea its a Second Cup.

Call me in the morning b4 you leave (wake me up) !!

10:00am?

Holy Jebus

Ya, the timmies off the Thickson exit will be fine.

Unless you NEED to go to Starbucks again , in that case head 2k north on Thickson and pull in to the Rogers plaza on the left (SW corner).

You have my cell 905 718 7945, if anyone else wants to come call.

um I would mimagine you have never removed ze heads? this is what they are..they hyave special sockets and not regular sockets... check it out. I need the name or socket for that job. Ya, um he is tellin you what u need. Get a 1/2" 12 point 12mm deep socket. I had to buy one when i took mine o...

When i bought my 96 GS in 99, i had a choice $1000 for Air or a sunroof. I chose the air, apparently all the plumbing is already run on all cars, at least that is what the dealer said. I wish i chose the roof. You may not want air, i hardly use it, it really makes the engine lag (feels like i am onl...

I'll be jumping on the 401 at Thickson Rd in Whitby.

C U there.

Lemme know if you got one! (and maybe the knob too) You in ajax? Drive to 20 min East on the 401 to Courtice Rd. and go to DOMS Wreckers. If i new, i would have grabbed you one. I was there on the weekend with another board member, I ripped a hole in one by accident, then grabbed another one for an...

A guy in the MX-6 forum offered to make them, see this thread. However, its cheaper to make these ourselves. http://www.mx6.com/forums/showthread.php?t=124075 For taking the old ones off, get a grinder. OR you will waste an hour with a hacksaw like i did. I bought the links off the MX-6 guy. They a...

I had the same problem, my engine was on my garage floor (no flywheel though) I took a 3-4ft piece of steel rod, drilled 2 holes through it, and bolted it in 2 of the flywheel holes. Turn the crank nut and once the bar presses on the ground, the crank will not turn anymore and you are set. I tried e...

Any idea if those suction cup dent removers work? I have something like 18 little dents and dings, i had over 20 fixed/filled in 2000 when i got my car repainted. Seems like people love to hit my car :x Anyhoo i bought 2 suction cup dent removers from princess auto on sale, i havent tried them yet b...