[FS] ZE Cams w/fresh heads, rs spoiler, cf..... NY

[Sleeper6]

http://s1033.photobucket.com/user/1087g ... le%20parts

Selling off a bunch of items and adding a small list of bits that will be available when the MX finally dies (basically I dont plan on removing them until its off the road, feel free to leave me a phone # and I will be sure to call you first when it happens). Was in process of rebuilding a KL for the 3RD time and found the crank .001 out of spec, I dont intend to spend money on more machine work. Dont forget prices do not include shipping.

KLDE heads, recently cleaned, decked, valves seated and checked from my last build. These have less then 2500miles on them before the bottom end gave out from crank walk.

KL crank polished and cleaned $75

Cleaned piston set with good wrist pins just need rings and connecting rod bearings $75

KL oil pump (used and notched for manual tensioner) $75 (I will pull the inspection plate and recheck tolerances before shipping, pulled off with good oil psi, melling pump with less than 20k)

KL Ecu and VAF $40 selling as a pair

KL fuel rail w/injectors $35 sold one, still have a spare set I found in storage

Spare KL core with heads (no cams or oil pump) $$make offer

RS mx3 spoiler w/garnish $120 pending

mx3 FX combat side skirts $70

mx3 OEM hatch shade w/ALL hardware $300 SOLD

mx3 Carbon Fiber vented evo style hood (sides painted over carbon) $350 Buyer p/u or arrange shipping on your end

mx3 Topmix front lip (has damage but useable and easily restorable to 100%) $70

I will try to post pics as soon as my email loads up, if you are trying to contact me texting works best if within the US otherwise please email.
315 five two one 3869
g.wandell@hotmail .com

All items located in Farmington NY 14425, Pick up in person preferred, if you are inquiring on shipping with a large item please have intent to buy I do not have alot of time for multiple shipping trips but I will work with you to move this stuff. Also in the market for a reliable MTX FC3s or miata within a $1500 budget or willing to trade items listed towards sale.

Also when the car finally dies, I have an autopower roll bar installed, pacesetter sts, headers, g4 intake, ZE throttlebody w/mil spacer, 2 new distys that will be available.

Again I apologize pics are not posted readly, if interested text me and I will send you a pic from my phone asap.

Thanks, Glen

[Sleeper6]

adding a bunch of misc items as well, if there is anything you might be searching for KL related, feel free to message me and dont be afraid to shoot me an offer

ps pump
intermediate shaft (3bolts) bearing makes a lil scraping but I pulled it from a jy, condition unknown.
KLDE cam set
1.8l air box (has some damage at the lower mounting tab)
5spd transmission (works but 1-2 was always a bit harsh, kept as a spare)
Second Set of DE heads
misc taillamps
rh headlamp (stock)
plastics! lots of plastics!

[Sleeper6]

Hatch shade sold.

[Sleeper6]

edited sold bits, pm if interested in anything