Page 1 of 2
[WTB] - 7 Post Distributor Cap
Posted: March 27th, 2014, 9:08 am
by RogueWolf
To any of our MX3 friends in Australia or Japan, I'm looking for an off the shelf distributor cap.
Needs to be the JDM / AUS 7 Post cap that we North Americans didn't get...
My understanding is the cap is the same for all mx3/mx6/ford probe/xedos6/millenia etc., anything with a distributor and K-series engine. (So before 1996? ish.)
Let me know if anyone can track one down for me!
Thanks!
Re: [WTB] - 7 Post Distributor Cap
Posted: April 24th, 2014, 2:17 pm
by RogueWolf
Does anyone know if this style distributor cap was sold in the UK as well?
Re: [WTB] - 7 Post Distributor Cap
Posted: April 24th, 2014, 5:32 pm
by Daninski
Corksport stopped selling them like 2 years ago. Best bet may be either Probetalk or MX-6.com
Re: [WTB] - 7 Post Distributor Cap
Posted: April 26th, 2014, 7:17 am
by SuperK
I posted this on a previous thread:
SuperK wrote:I picked up two new ones on ebay UK for 50 USD shipped. just keep your eyes open and you can get a good deal.
PN:
ADM51429 Blueprint
Commercial Ignition XD363
Re: [WTB] - 7 Post Distributor Cap
Posted: April 26th, 2014, 7:20 am
by SuperK
Re: [WTB] - 7 Post Distributor Cap
Posted: April 28th, 2014, 3:28 pm
by RogueWolf
I've got family in Scotland. I'll see if they can ship me one.
Which brings me to a UK based question... what's the equiv. store to a Canadian Tire / Part Source in the UK to get your parts from?
Also what year and model should I ask for... I was thinking a 1995 MX6 or Ford Probe... Figure that's gotta be safe right?
Re: [WTB] - 7 Post Distributor Cap
Posted: April 29th, 2014, 2:07 pm
by RogueWolf
So I looked up the part numbers... seems that the KL03 / KLDE / KLZE did not have the 7-post distributor cap that I need...
But the KF 2.0L V6 did... came with the external coil and wires.
So that part number for that CAP is KF01-18-V00, with aftermarket manufacturers having part numbers: J5323019, and M532A22.
I'll get one shipped from Scotland. I like the factory look of the distributor cap, and then I can run any coil I happen to have kicking around, also makes using my MSD Ignition easier.
Re: [WTB] - 7 Post Distributor Cap
Posted: May 1st, 2014, 1:57 pm
by RogueWolf
For anyone looking for the assembly information and Mazda Part numbers, it might be considerably cheaper to get the new OEM 7-Post distributor cap then it is to modify the KL disty cap.
http://demo.saleepc.ru/mazda/parts/eur/ ... 2/E2/1820A
Has some great info.
Re: [WTB] - 7 Post Distributor Cap
Posted: May 1st, 2014, 7:25 pm
by Daninski
I may be off base here but I thought the ZE 7 post disty cap was different in size than our standard K8/DE cap. I'll need to compare when I get a moment. ZE's definitely came with a 7 post cap, the distys had no internal coil so they would of had to. I've seen them at the JDM dealer as well.
Re: [WTB] - 7 Post Distributor Cap
Posted: May 6th, 2014, 8:21 am
by RogueWolf
I couldn't find a part number for a KL, 7 post distributor cap.
It would be awful to order the KF01 part and not have it fit the distributor.
Daninski, where did you say you saw them for sale?
Re: [WTB] - 7 Post Distributor Cap
Posted: June 16th, 2014, 10:43 pm
by wagZE
I am now looking for one too. Whether you see this now or a year from now pm me. Sold my old ones. Need one now
Re: [WTB] - 7 Post Distributor Cap
Posted: June 17th, 2014, 8:15 am
by RogueWolf
I grabbed one off of the UK Ebay. Fit perfectly. It's an OEM, HEI mod.
The cap is still being produced by Mazda, I only now found out that I could have ordered it directly from my local Mazda Dealership... because it's not for a North American car they will not accept returns on the part if it doesn't work. (At least my local dealership will.
)
Re: [WTB] - 7 Post Distributor Cap
Posted: June 17th, 2014, 8:47 am
by Sleeper6
RogueWolf wrote:I grabbed one off of the UK Ebay. Fit perfectly. It's an OEM, HEI mod.
The cap is still being produced by Mazda, I only now found out that I could have ordered it directly from my local Mazda Dealership... because it's not for a North American car they will not accept returns on the part if it doesn't work. (At least my local dealership will.
)
Is KF01-18-V00 the part # you used at your dealer? If so Ill check at work and see if i can pick one up
Re: [WTB] - 7 Post Distributor Cap
Posted: June 17th, 2014, 9:01 am
by RogueWolf
That's the correct part number. It was used on the Lantis Type-R with the 2.0L KF-DE / KF-ZE engine.
It bolts right up to our original distributor/rotor/coil, but if you can grab only the distributor/rotor combo it's almost 4lbs lighter and much more compact. But I noticed the plugs aren't the same...
Re: [WTB] - 7 Post Distributor Cap
Posted: June 17th, 2014, 5:56 pm
by Daninski
Have you had it on your car and did the engine run ok with it?