MX-3.com

well i got these from Europe and they are supper nice!!!

bad thing is i don't know how to really do this, as they take a different bulb and such i am not lost i know pathetic...


now i have the whole wiring harness kinda... pic here!!!



i doubt i could just splice the wires and such. two of the wires look to the same that is on the harness from the glass to the my car harness now... just one isn't the right color...

anyway i did do a search and all that came up with mooneggs log on it but i didn't seem to finish as it seemed he put in the old bulb. Then he did a HID conversion... do i need to do that?

anyways hope someone can help!

Thanks,

Kegan

Yes just cut off the 9004 connector and splice the wires to the new h4 connector... one is ground, one is low beams and the other is high beams... pretty simple.

or if you dont wanna deal with splicing, just get an adaptor harness.

http://www.ebay.com/itm/9004-To-H4-Conv ... 61&vxp=mtr

hopefully this helps, atleast now you know which is high/low/ground

bogaut wrote:or if you dont wanna deal with splicing, just get an adaptor harness.

http://www.ebay.com/itm/9004-To-H4-Conv ... 61&vxp=mtr

Thanks everyone!

I am going this route as then if I want to go back or somthing I don't have re hook anything up. Plus why work when I can just plug and play!

Thanks again,

Kegan

Lol you have the one aftmkt item you can buy off the shelf for our cars! Too bad you cant run 100w lamps that way though