Page 1 of 1
Air conditioning and blower problems
Posted: September 8th, 2011, 9:37 pm
by BeauX87
I recently bought a 92 mx2 and as i was driving it home noticed that when the ac (or fan at any speed really) is set to the speeds of 2 and 4, nothing comes out of the vents. But when its in 1 and 3 it works. Now to top that off my AC never blows cold air. It just feels like its blowing the air from outside in. Im pritty sure I hear my condenser kick in so I don't think its that but I figured id ask you guys what you thought.
Any help would be appreciated. Thanks
Re: Air conditioning and blower problems
Posted: September 15th, 2011, 4:54 pm
by BeauX87
Sooooo.......no one has a clue?
Re: Air conditioning and blower problems
Posted: September 15th, 2011, 5:36 pm
by DeadMaker
I had a similar problem in my old car in 3 speed position.If i remember correct it was the wiring connection wrong that's why it didn't work.1,2,4 was ok.
Re: Air conditioning and blower problems
Posted: September 15th, 2011, 5:41 pm
by Ryan
It'll be the blower motor resistor.
Re: Air conditioning and blower problems
Posted: September 15th, 2011, 6:42 pm
by BeauX87
ok ill check out the wiring and the blower motor resistor. Thanks for the tips.
Re: Air conditioning and blower problems
Posted: September 23rd, 2011, 6:17 pm
by BeauX87
Were is the blower motor resistor located? Cant seem to find it anywere.
Re: Air conditioning and blower problems
Posted: September 23rd, 2011, 6:30 pm
by Ryan
Its up under the passenger footwell. Its the only thing in the ducting besides the motor itself.
Re: Air conditioning and blower problems
Posted: September 23rd, 2011, 7:21 pm
by BeauX87
Oh ok thanks. I appreciate it greatly.