[FS] Complete part out of every mx3 thing i have.

Muzzled · Post by **Muzzled** » January 21st, 2011, 5:14 pm

Euro vents 80
Fidanza flywheel 200
GS wrap around. 50

Oem Full Sides (USDM Spec) 350-400 SOLD to Dizzel
Mazdaspeed front bumper. (phantom blue mica)Sold to Flyer
Hei mod ZE disty SOLD
Hatch Shade SOLD
2.5inch catback with magnaflow twintip muffler SOLD
Aluminum battery tiedown with "Mazdaspeed" cut into it. SOLD
or w/e the process is called idk. SOLD
Chrome door handles SOLD
2 Sets of SE heated leathersSOLD
SE Leather Steering wheel SOLD
AWR motor mounts -probe front, mx-3 rear. 120 for both. SOLD to Night_Shade
Front/rear strut tower bars. SOLD
Ford Racing Zx2 struts and H&R springs (less than a year old) new mounts when installed too. Sold to Flyer

Car is gone so what i have left is still up for grabs
Ontario owners will have dibs due to ease of pickup... the less i have to deal with shipping the better. PRICES DO NOT INCLUDE shipping.

300zxrb26dett · Post by **300zxrb26dett** » January 21st, 2011, 5:32 pm

I would be interested in the battery tie down

Sleeper6 · Post by **Sleeper6** » January 21st, 2011, 5:38 pm

interested in the MS front, more so if its OEM... Also if you have a SS.

Muzzled · Post by **Muzzled** » January 21st, 2011, 5:39 pm

Sleeper6 wrote:interested in the MS front, more so if its OEM... Also if you have a SS.

shipping from canada to you will cost more than it would for you to buy new.

Sleeper6 · Post by **Sleeper6** » January 21st, 2011, 5:50 pm

Muzzled wrote:
Sleeper6 wrote:interested in the MS front, more so if its OEM... Also if you have a SS.
shipping from canada to you will cost more than it would for you to buy new.

If its OEM polyuerthane its worth the shipping, otherwise I know i can get a fiberglass one from corksport. Did you have a Shortshift by chance?

Muzzled · Post by **Muzzled** » January 21st, 2011, 5:52 pm

Sleeper6 wrote:
Muzzled wrote:
Sleeper6 wrote:interested in the MS front, more so if its OEM... Also if you have a SS.
shipping from canada to you will cost more than it would for you to buy new.
If its OEM polyuerthane its worth the shipping, otherwise I know i can get a fiberglass one from corksport. Did you have a Shortshift by chance?

its not oem poly. its fibreglass but its alot thicker than the corksport one amd its been fitted properly. and no to the short throw.

Daninski · Post by **Daninski** » January 21st, 2011, 6:40 pm

PM'd for ZE disty.

wytbishop · Post by **wytbishop** » January 21st, 2011, 6:42 pm

how much for the E-spec full length skirts? I'll figure out shipping.

300zxrb26dett · Post by **300zxrb26dett** » January 21st, 2011, 7:11 pm

hmmm I see you gave dibs to canada people first. Let me know if you want to ship the tie down to the states

AaronTietje · Post by **AaronTietje** » January 21st, 2011, 7:40 pm

Hi, I'm interested in the mounts and spoiler.

Sleeper6 · Post by **Sleeper6** » January 21st, 2011, 9:10 pm

so why not just buy a decent transmission? Seems a waste to throw it away for somethan as simple as a tranny

mikeinaus · Post by **mikeinaus** » January 21st, 2011, 9:20 pm

pm me a price for struts, mounts and possibly springs (seperate prices for everything please). id also be interested in sides if there the right price.

Flyer · Post by **Flyer** » January 21st, 2011, 9:47 pm

How much for the entire car? >_>

Post by **Mooneggs** » January 21st, 2011, 9:50 pm

Flyer wrote:How much for the entire car? >_>

that's what I'm talking about! tranny could be swapped out pretty easily...

Muzzled · Post by **Muzzled** » January 21st, 2011, 10:33 pm

Mooneggs wrote:
Flyer wrote:How much for the entire car? >_>
that's what I'm talking about! tranny could be swapped out pretty easily...

ya well im an idiot on further inspection..... the motors seized. >_< bearings spun....sooooo the ze i guess is shot top ends still good but bottom is fcked. ill try to respond to people in order they post in the thread. so please bare with me

MX-3.com

[FS] Complete part out of every mx3 thing i have.

[FS] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.

Re: [GI] Complete part out of every mx3 thing i have.